破壊的変更38
メモリダンプ PVC を VM スナップショットおよびエクスポートから除外
影響対象メモリダンプ PVC が接続された VM のスナップショットまたはエクスポート(推定)
この変更以前から、スナップショットまたはエクスポートを復元しても、ダンプ PVC は復元されませんでした。
根拠“Snapshots and exports no longer include the dump PVC (restore never restored it anyway).” kubevirt/kubevirt/pull/19550 ↗ 原文を表示
- [PR #19550][Acedus] Memory dumps are attached as utility volumes and require the UtilityVolumes feature gate, which is promoted to Beta and enabled by default. VM snapshots and exports no longer include the memory dump PVC.
github.com/kubevirt/kubevirt/releases/tag/v1.10.0VirtualMachineBackup の種別報告をボリューム単位のステータスに変更
影響対象ベースチェックポイントのビットマップがないディスクを含む、チェックポイントベースの VirtualMachineBackup
以前は、ベースチェックポイントのビットマップがないディスクが1つでもあると、有効なビットマップを持つディスクも含めてバックアップ全体が失敗していました。現在は、そのディスクをフルバックアップし、ほかのディスクは増分差分を維持します。
原文を表示
- [PR #19056][Acedus] VirtualMachineBackup no longer fails when a disk has lost the base checkpoint's bitmap; that disk is backed up in full and type is now reported per volume in `status.includedVolumes[].type`, replacing the removed `status.type`.
github.com/kubevirt/kubevirt/releases/tag/v1.10.0VirtualMachineBackup のバックアップ種別のボリューム単位での報告
影響対象VirtualMachineBackup のステータスを参照するクライアントまたは自動化処理(推定)
以前は、チェックポイントベースのバックアップでディスクのベースチェックポイントのビットマップが失われると、バックアップ全体が失敗していました。現在は、そのディスクをフルバックアップします。
原文を表示
- [PR #19056][Acedus] VirtualMachineBackup no longer fails when a disk has lost the base checkpoint's bitmap; that disk is backed up in full and type is now reported per volume in `status.includedVolumes[].type`, replacing the removed `status.type`.
github.com/kubevirt/kubevirt/releases/tag/v1.10.0io.kubevirt.disk.name が VM ボリューム名を使用
影響対象ディスクレイヤーを含むエクスポート済み OCI アーティファクト(推定)
これまでは、アノテーションには VM 仕様のボリューム名ではなく、PVC 由来のサニタイズ済みマウントディレクトリー名が格納されていたため、VM ボリュームを識別できませんでした。たとえば、fedora-vm-rootdisk をバックエンドとする rootdisk ボリュームは、現在 rootdisk としてラベル付けされます。
根拠“The volume name is passed to the exporter pod and the layer is annotated with it. A volume `rootdisk` backed by claim `fedora-vm-rootdisk` is annotated `rootdisk`.” kubevirt/kubevirt/pull/19066 ↗ 原文を表示
- [PR #19066][0xFelix] The io.kubevirt.disk.name annotation of exported OCI artifacts now carries the volume name from the VM instead of the PersistentVolumeClaim name
github.com/kubevirt/kubevirt/releases/tag/v1.10.0ユーザー定義の HostDisk ボリュームを CBT の対象外に
影響対象ユーザー定義の HostDisk ボリュームを使った CBT
存在しない DiskOrCreate イメージが通知なく再作成された場合、CBT オーバーレイがすでに存在しないディスクを記述したままになることがありました。HostDisk ボリュームは、CBT のメモリーオーバーヘッドに含まれなくなりました。
根拠“Only PVC and DataVolume volumes are eligible for CBT. User-defined HostDisk volumes are no longer tracked, and no longer count towards CBT's memory overhead.” kubevirt/kubevirt/pull/19410 ↗ 原文を表示
- [PR #19410][Acedus] HostDisk volumes are no longer eligible for changed block tracking.
github.com/kubevirt/kubevirt/releases/tag/v1.10.0virt-launcher-monitor による VIRT_LAUNCHER_LOG_VERBOSITY の不使用
影響対象virt-launcher-monitor 用に VIRT_LAUNCHER_LOG_VERBOSITY を設定している構成(推定)
以前は、有効な整数値を設定すると Go 製モニターのログ出力レベルに反映されていました。書き換え後の C 製モニターは、設定値をログ出力レベルの設定に使用しません。
根拠“- no `VIRT_LAUNCHER_LOG_VERBOSITY` in the monitor” kubevirt/kubevirt/pull/19240 ↗ 原文を表示
- [PR #19240][vladikr] virt-launcher-monitor is rewritten in C to reduce memory footprint to about 2Mi
github.com/kubevirt/kubevirt/releases/tag/v1.10.0永続予約付き LUN の既定バスを SCSI に変更し、非 SCSI バスを拒否
根拠“Default bus to SCSI when reservation is true and bus is unset, and reject with a validation error when reservation is true with an explicitly non-SCSI bus.” kubevirt/kubevirt/pull/18267 ↗ 原文を表示
- [PR #18267][akalenyu] Default LUN bus to SCSI when persistent reservation is enabled
github.com/kubevirt/kubevirt/releases/tag/v1.10.0ソフトウェアエミュレーションの明示的なポリシー指定の必須化
影響対象ソフトウェアエミュレーションまたはVMのエミュレーションポリシーを使用するKubeVirtクラスター
以前は、ソフトウェアエミュレーションをクラスター全体のオン/オフ動作で制御していましたが、現在はエミュレーションポリシーで選択した場合にのみ使用されます。KubeVirt CRで spec.configuration.emulationPolicy: Software を設定すると、従来の動作が維持されます。
根拠“Action Required: Add `spec.configuration.emulationPolicy: Software` to kubevirt CR to keep existing behaviour if using Software Emulation” kubevirt/kubevirt/pull/19244 ↗ 原文を表示
- [PR #19244][jschintag] Add configuration option for cluster wide and per VM emulation (Alpha Stage).
github.com/kubevirt/kubevirt/releases/tag/v1.10.0virt-launcher-monitor による Istio プロキシ終了処理の削除
影響対象Istio サイドカーを使用する KubeVirt 環境
必要な対応Istio 1.27 以降、またはネイティブサイドカーモード
従来の Istio インジェクションでは、Envoy は通常のコンテナーとして動作し、メインコンテナーの終了後も Pod を稼働させ続けることがありました。シャットダウン時に virt-launcher-monitor がプロキシを終了する処理はなくなりました。
原文を表示
- [PR #19239][akalenyu] Istio sidecar proxy termination is no longer handled by virt-launcher-monitor; Istio >= 1.27 is required with kubevirt (alternatively, use native sidecar mode)
github.com/kubevirt/kubevirt/releases/tag/v1.10.0VirtualMachineBackup ステータスのプルモード用エンドポイントリンクの分離
影響対象プルモードのバックアップにおける VirtualMachineBackup のステータス
プルモードの VirtualMachineExport に内部リンクと外部リンクの両方がある場合、以前はバックアップのステータスにどちらか一方しか公開されず、もう一方が失われていました。従来の EndpointCert、DataEndpoint、MapEndpoint フィールドは削除され、各リンクエントリーに個別の CA 証明書と、ボリュームごとのデータ URL およびマップ URL が含まれるようになりました。
根拠“The existing fields (`EndpointCert`, `DataEndpoint`, `MapEndpoint`) are removed. Consumers of pull-mode backups should use `status.links.internal` and/or `status.links.external` instead.” kubevirt/kubevirt/pull/18537 ↗ 原文を表示
- [PR #18537][davmarro] Add structured `links` field to `VirtualMachineBackup` status exposing both internal and external export endpoints for pull-mode backups. The existing endpoint fields are removed.
github.com/kubevirt/kubevirt/releases/tag/v1.10.0VSOCK フィーチャーゲートの Beta への昇格とデフォルトでの有効化
影響対象VSOCK フィーチャーゲートを使用または設定するインストール環境、および VSOCK を使用するワークロード(推定)
原文を表示
- [PR #19155][0xFelix] The VSOCK feature gate graduated to Beta and is now enabled by default.
github.com/kubevirt/kubevirt/releases/tag/v1.10.0KubeVirt による旧 cpumanager ノードラベルの使用終了
影響対象virt-handler によって更新されたノードで、旧 cpumanager ノードラベルを使用する自動化ルールまたはスケジューリングルール(推定)
Pod では引き続き kubevirt.io/cpumanager ラベルが使用されます。
原文を表示
- [PR #19100][xpivarc] Label "cpumanager" is no longer used
github.com/kubevirt/kubevirt/releases/tag/v1.10.0CBT のダーティービットマップのオーバーヘッドを VM のメモリー計算に反映
従来のメモリー計算では、CBT のダーティービットマップに必要なメモリーが含まれておらず、必要量を過小評価していました。現在は、CBT の対象となるボリューム、アクティブなバックアップトラッカー、動的な増加に備えるバッファーを考慮し、計算対象となる各ディスクのオーバーヘッドを含めています。
原文を表示
- [PR #18416][Acedus] VMs with CBT now correctly factor in the required memory overhead for each of their included disks.
github.com/kubevirt/kubevirt/releases/tag/v1.10.0カスタム seccomp プロファイルのインストールに対するゲート制御の廃止
影響対象KubevirtSeccompProfile ゲートを使用するクラスター、または KubeVirt のカスタム seccomp プロファイルに依存するクラスター
このリリースより前は、KubevirtSeccompProfile が明示的に有効化されている場合にのみ、KubeVirt はプロファイルをインストールしていました。現在は、ゲートが無効でもインストールされます。
根拠“**Before:** The `KubevirtSeccompProfile` feature gate is at Beta. The custom seccomp profile is only installed when the feature gate is explicitly enabled, and operator tests verify configuration statically (file presence, pod annotation). **After:** The `KubevirtSeccompProfile` feature gate graduates to GA. The custom seccomp profile is always installed, the feature gate check is removed, and three hardening improvements are included:” kubevirt/kubevirt/pull/18888 ↗ 原文を表示
- [PR #18888][dankenigsberg] Graduate the KubevirtSeccompProfile feature gate to GA. The custom seccomp profile is now always installed. Tighten profile file permissions to 0600, and write it atomically.
github.com/kubevirt/kubevirt/releases/tag/v1.10.0Network Resources Injector によるネットワークリソース注入の常時有効化
影響対象NetworkAttachmentDefinition に基づくインターフェースでネットワークリソース注入を使用するインストール環境
ExternalNetResourceInjection フィーチャーゲートは v1.9 以降デフォルトで有効でしたが、これを無効にしていたインストール環境でも、今後は無効化できません。virt-controller は NetworkAttachmentDefinition オブジェクトを照会せず、launcher Pod にネットワークリソースの要求を注入しなくなりました。また、その ClusterRole から k8s.cni.cncf.io network-attachment-definitions の get 権限が削除されました。
根拠“The `ExternalNetResourceInjection` FG has been Beta since v1.8.0 and enabled by default since v1.9. It disables virt-controller's query of `NetworkAttachmentDefinition` objects and the deployment of NAD RBAC rules by virt-operator. This PR graduates it to GA, making this behavior always on. virt-controller no longer queries `NetworkAttachmentDefinition` objects, injects network resource requests into the launcher pod, or holds the `k8s.cni.cncf.io network-attachment-definitions` get permission.” kubevirt/kubevirt/pull/18497 ↗ 原文を表示
- [PR #18497][orelmisan] ExternalNetResourceInjection graduated to GA. virt-controller no longer queries NetworkAttachmentDefinition objects or injects network resource requests into the launcher pod. The k8s.cni.cncf.io network-attachment-definitions get rule is
github.com/kubevirt/kubevirt/releases/tag/v1.10.0VM 移行でハッシュ化されたインターフェース名を使用
影響対象序数付きネットワークまたはタップインターフェース名を持つ VM、および --upgrade-ordinal-ifaces を使用する自動化
必要な対応ライブマイグレーション中の対象 VM の変換(手動操作不要)
以前は、移行先に移行元 Pod の序数付きインターフェース名が引き継がれる場合があり、移行前フックはゲートによって制御されていました。--upgrade-ordinal-ifaces フラグは利用できなくなりました。
根拠“Migration targets will no longer preserve ordinal pod interface names from the source pod - the hashed scheme is always used. The pre-migration hook that converts ordinal tap names to hashed equivalents now runs unconditionally” kubevirt/kubevirt/pull/18317 ↗ 原文を表示
- [PR #18317][orelmisan] Graduate the PodSecondaryInterfaceNamingUpgrade feature gate to GA. The pre-migration hook that converts ordinal network interface names to hashed equivalents now runs unconditionally.
github.com/kubevirt/kubevirt/releases/tag/v1.10.0VMI のメモリー要求における QEMU オーバーヘッド見積もりの増加
影響対象KVM または MSHV ハイパーバイザーバックエンドを使用する VMI Pod
QEMU プロセスのオーバーヘッド見積もりが 30Mi から 50Mi に増加し、各 VMI Pod のメモリー要求に 20Mi が加算されます。
原文を表示
- [PR #18388][dasionov] Bumped QEMU process memory overhead from 30Mi to 50Mi, increasing VMI pod memory requests by 20Mi to reflect actual QEMU RSS requirements with current QEMU versions.
github.com/kubevirt/kubevirt/releases/tag/v1.10.0ノードフックにおけるプラグインレベルの条件の適用
影響対象プラグインレベルの Spec.Condition を設定したノードフック(推定)
条件の扱いがドメインフックと同じになります。
原文を表示
- [PR #18414][iholder101] Fix CallNodeHooks to evaluate plugin-level Spec.Condition, ensuring consistent behavior between domain hooks and node hooks.
github.com/kubevirt/kubevirt/releases/tag/v1.10.0kubevirt.io/client-go/log のグローバルな -v 登録の削除
影響対象kubevirt.io/client-go/log をインポートするコード
別のインポート済みパッケージ(glog や klog など)がすでに flag.CommandLine に -v を登録していると、パッケージのインポート時にパニックが発生していました。現在、このフラグはパッケージ内限定の FlagSet に保持されるため、flag.CommandLine.Lookup("v") では取得できなくなりました。代わりに log.VerbosityFlag() で取得できます。
根拠“The `-v` flag is registered on a package-private `FlagSet` instead of the global `flag.CommandLine`. A new `VerbosityFlag()` function is exported so that consumers can bridge it into pflag without going through `flag.CommandLine`. All 8 internal call sites are updated. Importing `kubevirt.io/client-go/log` no longer registers any flags on the global `flag.CommandLine`, eliminating the conflict entirely regardless of `init()` ordering.” kubevirt/kubevirt/pull/18294 ↗ 原文を表示
- [PR #18294][guzalv] client-go/log: The `-v` verbosity flag is no longer registered on `flag.CommandLine` during `init()`. External consumers that used `flag.CommandLine.Lookup("v")` to obtain the verbosity flag must switch to `log.VerbosityFlag()`. This eliminates panics when importing `kubevirt.io/client-go` alongside packages that also register a `-v` flag (e.g. glog, klog).github.com/kubevirt/kubevirt/releases/tag/v1.10.0VMI ユーティリティボリュームを使用するメモリダンプ
以前は、ダンプ時に MemoryDump ボリュームを VM テンプレートと vmi.spec.volumes の両方に追加していました。現在はテンプレートを変更せず、PVC を VMI にアタッチします。ダンプ中に VMI が停止または再起動すると、ダンプは新しい VMI で続行されず失敗します。アップグレード中にすでに進行していたダンプは完了後にデタッチされます。
根拠“A memory dump request attaches its PVC to the VMI as a utility volume of type `MemoryDump`, nothing is written to the VM template. A dump still in progress when its VMI stops or restarts fails instead of dumping the new VMI. Dumps that were in progress on it during the upgrade finish, then it's detached.” kubevirt/kubevirt/pull/19550 ↗ 原文を表示
- [PR #19550][Acedus] Memory dumps are attached as utility volumes and require the UtilityVolumes feature gate, which is promoted to Beta and enabled by default. VM snapshots and exports no longer include the memory dump PVC.
github.com/kubevirt/kubevirt/releases/tag/v1.10.0mdev ベースの vGPU ライブマイグレーション向けの VGPULiveMigration から MDevVGPULiveMigration への改名
影響対象mdev ベースの vGPU ライブマイグレーション用 Alpha フィーチャーゲートを有効にしている環境
根拠“Mdev-based vGPU live migration uses `MDevVGPULiveMigration`.” kubevirt/kubevirt/pull/19546 ↗ 原文を表示
- [PR #19546][dasionov] Renamed the alpha feature gate for mdev-based vGPU live migration from VGPULiveMigration to MDevVGPULiveMigration.
github.com/kubevirt/kubevirt/releases/tag/v1.10.0ランチャーフック条件からの domainSpec の削除
影響対象domainSpec を参照するランチャーフックの condition 式(推定)
以前は、フック条件から VMI と domainSpec の両方を参照できました。条件付きのドメイン変更では、引き続き CEL の has() 演算子を使用できます。
根拠“In addition, Launcher hook `condition` expressions could also reference `domainSpec` in addition to the VMI, which both complicated the code and was wrong because on certain situations the domain did not exist yet, it is not relevant for most hook points and it's a low-level libvirt-coupled variable which we don't want to commit to.” kubevirt/kubevirt/pull/19403 ↗ 原文を表示
- [PR #19403][iholder101] Add PreBoot and PreMigrationSource sidecar launcher hook points for plugins.
github.com/kubevirt/kubevirt/releases/tag/v1.10.0準備段階での中止時にライブマイグレーションをキャンセル
以前は、ドメインの準備中またはPreMigrationSourceフック中に中止するとAbortFailedが報告され、マイグレーションは続行されていました。現在はマイグレーションがキャンセルされ、AbortSucceededが報告されます。引き継ぎ後、libvirtのマイグレーションジョブを確認できるようになるまでの短い間は、中止してもAbortFailedが報告され、virt-handlerが再試行します。
根拠“Also, there's a small behavior change for all migrations (with or without plugins): an abort that arrives while the migration is being prepared (domain preparation or `PreMigrationSource` hooks) now cancels it and reports `AbortSucceeded`, where it previously reported `AbortFailed` and the migration continued. A short window remains between the hand-off and libvirt's migration job becoming observable; an abort landing there still reports `AbortFailed`, and virt-handler retries.” kubevirt/kubevirt/pull/19403 ↗ 原文を表示
- [PR #19403][iholder101] Add PreBoot and PreMigrationSource sidecar launcher hook points for plugins.
github.com/kubevirt/kubevirt/releases/tag/v1.10.0ContainerPathVolume フィーチャーゲート無効時の新規 ContainerPath 使用に対する VM/VMI アドミッション拒否
影響対象ContainerPathVolume フィーチャーゲートが無効な状態で ContainerPath を使用する VM/VMI ワークロード
この変更前は、新たな使用に対するゲートの確認は VM/VMI のアドミッションでは行われませんでしたが、ゲート無効化前にアドミッションされた VMI については、コントローラー側のチェックが引き続き行われていました。すでに ContainerPath を使用しているオブジェクトへの更新は引き続き許可されます。
根拠“Rejects new ContainerPath usage at VM/VMI admission when the feature gate is disabled, while allowing updates to objects already using it.” kubevirt/kubevirt/pull/19251 ↗ 原文を表示
- [PR #19251][mhenriks] Check ContainerPathVolume feature gate at admission time. Reject /run/kubevirt* and /run/libvirt* paths.
github.com/kubevirt/kubevirt/releases/tag/v1.10.0DRA ResourceClaim を使用する VMI の移行不可化
影響対象NetworkDevicesWithDRA が有効で、ResourceClaim をバックエンドとする DRA ネットワークを持つ VMI
ResourceClaim は特定の割り当てにバインドされるため、移行先の Pod では同じ割り当てを再度予約できません。
根拠“VerifyVMIMigratable now rejects the former. The check is guarded by the NetworkDevicesWithDRA feature gate, threaded in from virt-handler, so behavior is unchanged when the gate is disabled.” kubevirt/kubevirt/pull/19468 ↗ 原文を表示
- [PR #19468][orelmisan] VMI whose DRA network is backed by a ResourceClaim (rather than a ResourceClaimTemplate) are now reported as non-migratable.
github.com/kubevirt/kubevirt/releases/tag/v1.10.0KubeVirt インフラストラクチャコンテナのルートファイルシステムが読み取り専用に
影響対象virt-handler と virt-launcher の init コンテナを除く KubeVirt インフラストラクチャコンテナ
必要な対応書き込み可能な /tmp ボリュームは不要で、証明書はマウントされた Secret のパスから直接読み込み
このリリース以前は、含まれるコンテナで readOnlyRootFilesystem: true が設定されておらず、virt-api は使用されない一時的な証明書ディレクトリを作成していました。証明書はマウントされた Secret のパスから直接読み込まれ、書き込み可能な /tmp ボリュームは追加されません。
根拠“KubeVirt containers (`virt-operator`, `virt-api`, `virt-controller`, `virt-exportproxy`, and `virt-synchronization-controller`) run without `readOnlyRootFilesystem: true`, triggering compliance scan findings.” kubevirt/kubevirt/pull/18853 ↗ 原文を表示
- [PR #18853][davmarro] Enable readOnlyRootFilesystem for all KubeVirt infrastructure containers
github.com/kubevirt/kubevirt/releases/tag/v1.10.0virtctl create vm の非推奨ボリュームフラグの削除
影響対象--volume-blank、--volume-datasource、または --volume-clone-pvc を使用する virtctl create vm の実行(推定)
ボリュームの作成には、削除されたフラグの代わりに type:blank、type:ds、または type:pvc を指定した --volume-import を使用します。
原文を表示
- [PR #19362][NoamBerkoLaor] Removed deprecated virtctl create vm flags --volume-blank, --volume-datasource, and --volume-clone-pvc. Use --volume-import with type:blank, type:ds, or type:pvc instead.
github.com/kubevirt/kubevirt/releases/tag/v1.10.0新しい virt-export Service でヘッドレスポート 8443 を使用
新規エクスポートのリンクでは :8443 を使用しますが、既存の ClusterIP エクスポートでは引き続き :443 を使用します。https://virt-export-*.svc:443 をハードコードしているクライアントは、新規エクスポートで動作しなくなります。status.links に従うクライアントは引き続き動作します。
根拠“New exports are not ClusterIP on `:443`. Clients that hardcode `https://virt-export-*.svc:443` will break for those. Clients that follow `status.links` should be fine. Leftover ClusterIP exports stay on `:443`.” kubevirt/kubevirt/pull/18606 ↗ 原文を表示
- [PR #18606][OOsemka] Make new virt-export Services headless on port 8443 so virt-exportproxy can reach exporters across isolated networks. Existing ClusterIP/443 export Services are left in place. Internal VMExport links include the Service dial port (:8443 or :443).
github.com/kubevirt/kubevirt/releases/tag/v1.10.0プラグインフックの spec.launcherHooks への移行
影響対象spec.domainHooks または PreVMStop を使用する Plugin オブジェクト(推定)
以前の spec.domainHooks ではフックポイントを明示する必要がなく、停止フックポイントには PreVMStop という名前が付いていました。ランチャーフックではフックポイントの明示が必須となり、OnVMStop を使用します。
原文を表示
- [PR #19160][iholder101] Plugin's spec.domainHooks is renamed to spec.launcherHooks. Launcher hooks now require explicit hook points. PreVMStop is renamed to OnVMStop.
github.com/kubevirt/kubevirt/releases/tag/v1.10.0virt-handler /v1/vmstats の GET から POST への変更
影響対象virt-handler の /v1/vmstats エンドポイントを呼び出すクライアント(推定)
以前は、1つの VMStatsRequest がノード上のすべての VMI に適用され、統計カテゴリはクエリパラメーターで指定していました。現在は JSON 本文で、VMI ごとに統計カテゴリを指定します。
根拠“virt-handler GetVMStats accepts a per-VMI VMStatsRequest body, allowing the caller to filter which VMIs to collect from and specify the stats categories it needs on a per-VMI basis, rather than one set applied to every VMI on the node, so it can collect different data for different VMIs in a single call.” kubevirt/kubevirt/pull/18938 ↗ 原文を表示
- [PR #18938][machadovilaca] Accept a per-VMI VMStatsRequest body in virt-handler GetVMStats
github.com/kubevirt/kubevirt/releases/tag/v1.10.0GPU メモリーコピーのレコーディングルール名を vmi:kubevirt_vmi_gpu_mem_copy_utilization_ratio:sum に変更
影響対象vmi:kubevirt_vmi_gpu_mem_copy_util:sum を使用する監視クエリとダッシュボード(推定)
以前のレコーディングルール名は vmi:kubevirt_vmi_gpu_mem_copy_util:sum でした。
根拠“-| vmi:kubevirt_vmi_gpu_mem_copy_util:sum | Recording rule | Gauge | Memory utilization (ratio, 0-1) of the GPU passed through to a virtual machine instance. |” kubevirt/kubevirt/pull/19144 ↗ 原文を表示
- [PR #19144][machadovilaca] Add GPU utilization time and active engine time recording rules
github.com/kubevirt/kubevirt/releases/tag/v1.10.0client-go KubeVirt サブリソースクライアントヘルパーの削除
影響対象GetKubevirtSubresourceClient または GetKubevirtSubresourceClientFromFlags を呼び出す client-go アプリケーションまたはツール(推定)
これらの関数は、KubeVirt サブリソースクライアントを構築して返す手段を提供していました。
原文を表示
- [PR #18874][xpivarc] client-go: GetKubevirtSubresourceClient is removed
github.com/kubevirt/kubevirt/releases/tag/v1.10.0DRA ネットワークでの SR-IOV バインディングの拒否
影響対象DRA ネットワークで構成された SR-IOV インターフェース
従来は、DRA ネットワークで SR-IOV バインディングを使用でき、virt-launcher がパススルー用に DRA デバイスメタデータから PCI アドレスを解決していました。今後、これらのインターフェースではバインディングプラグインを使用する必要があります。
根拠“It is no longer possible to use SR-IOV binding with DRA networks - the network admitter rejects them and only allows interfaces using binding plugins.” kubevirt/kubevirt/pull/18451 ↗ 原文を表示
- [PR #18451][orelmisan] SR-IOV interfaces are no longer supported with DRA networks.
github.com/kubevirt/kubevirt/releases/tag/v1.10.0LibvirtHooksServerAndClient の GA 昇格と常時有効化
影響対象LibvirtHooksServerAndClient を設定している環境、またはライブマイグレーションで同機能のドメイン変更フックを使用する環境
以前は、ドメイン変更フック機構はベータ機能で、明示的に有効化する必要がありました。フックは移行中に tap デバイス名を調整します。
根拠“Graduate the `LibvirtHooksServerAndClient` feature gate (VEP-141) to GA.” kubevirt/kubevirt/pull/18687 ↗ 原文を表示
- [PR #18687][Barakmor1] Graduate LibvirtHooksServerAndClient feature gate to GA
github.com/kubevirt/kubevirt/releases/tag/v1.10.0Stall detector API フィールドの型変更
影響対象MigrationStallDetection を有効にして v1.9 からアップグレードするクラスター、および v1.9 の StallDetectorOptions をインポートする SDK
4つの factor フィールドの型が *string から *resource.Quantity に、StallProgressTimeout と SwitchoverTimeout の型が *uint64 から *int64 に変わります。この変更により、MigrationStallDetection を有効にしたクラスターのアップグレードで問題が発生したり、v1.9 の型をインポートする SDK でコンパイル時エラーが発生したりする可能性があります。
根拠“**Backward compatibility note:** These changes are NOT strictly backward compatible. At the API level, these changes break API SDK since anyone importing kubevirt.io/api/core/v1 from v1.9 and using StallDetectorOptions would see compile-time breakage when upgrading (e.g. *string -> *resource.Quantity). But at the serialization/upgrade level for API they ARE compatible. On the wire, MigrationOptions changes are breaking and thus this will break cluster upgrades if someone has the FG enabled when upgrading 1.9->1.10.” kubevirt/kubevirt/pull/18303 ↗ 原文を表示
- [PR #18303][Aseeef] BREAKING CHANGE: Modifies internal on-the-wire API fields for the stall detector feature; MigrationStallDetection FG must be disabled for cluster upgrades to succeed.
github.com/kubevirt/kubevirt/releases/tag/v1.10.0非NICデバイス用PCIルートポートのホットプラグ無効化
影響対象非NICデバイスを接続したPCIルートポートを持つVM
Windowsの「ハードウェアを安全に取り外す」メニューなど、ゲストOSのホットプラグ機能によって、ディスク、メモリバルーン、RNG、ウォッチドッグなどの重要なデバイスが取り外される可能性がありました。NIC用ポートと、将来のホットプラグ用に確保された空きポートは引き続き利用できます。
原文を表示
- [PR #17605][dasionov] Bug fix: Prevent guest OS from ejecting critical PCI devices (disks, memory balloon, RNG, watchdog) via hotplug mechanisms like the Windows "Safely Remove Hardware" tray menu. PCI root ports hosting non-NIC devices are now marked as non-hotpluggable, while NIC ports and empty ports reserved for future hotplug remain available.
github.com/kubevirt/kubevirt/releases/tag/v1.10.0Slirp ネットワークバインディングプラグインのサイドカーイメージの削除
影響対象Slirp ネットワークバインディングプラグインのサイドカーイメージを参照または使用している環境
原文を表示
- [PR #18613][orelmisan] Removed the slirp network binding plugin sidecar image. The plugin had no known consumers.
github.com/kubevirt/kubevirt/releases/tag/v1.10.0複数の vGPU を持つテンプレートを拒否する RamFB ディスプレイ検証
影響対象ramFB が存在し、enabled が未設定の vGPU を持つ VirtualMachine および VirtualMachineInstanceReplicaSet のテンプレート
以前は、そのような vGPU を複数持つテンプレートが作成時に受け入れられ、その後、VMI の作成時に失敗することがありました。
原文を表示
- [PR #18542][thc1006] RamFB display validation now treats a vGPU whose ramFB is present with its enabled field unset as an enabled display, matching the API default. A VirtualMachine or VirtualMachineInstanceReplicaSet template with more than one such vGPU is now rejected at creation instead of being accepted and failing later when its VMI is created.
github.com/kubevirt/kubevirt/releases/tag/v1.10.0