RATATOSK
← リリース一覧

Longhornv1.10.1

セキュリティ 1重大な修正 20その他の変更 16

Longhornの通知を受け取る

週次メールは確認すべき変更がある週だけ、深刻度がcriticalのセキュリティアドバイザリは即時に届きます。

アップグレード前の確認事項

前提条件9
Longhorn manager ホットフィックスイメージによる緩和策

この緩和策では、アップグレード時のバージョンチェックを無効化し、manager イメージのタグを v1.10.1 から v1.10.1-hotfix-2 に変更します。

> To mitigate the issues, replace `longhorn-manager:v1.10.1` with the hotfixed image `longhorn-manager:v1.10.1-hotfix-2`.
> Follow these steps to apply the update:
> 1. **Disable the upgrade version check**
>    - Helm users: Set `upgradeVersionCheck` to `false` in the `values.yaml` file.
>    - Manifest users: Remove the `--upgrade-version-check` flag from the deployment manifest.
> 2. **Update the `longhorn-manager` image**
>    - Change the image tag from `v1.10.1` to `v1.10.1-hotfix-2` in the appropriate file:
>      - For Helm: Update `values.yaml`
>      - For manifests: Update the deployment manifest directly.
> 3. **Proceed with the upgrade**
>    - Apply the changes using your standard Helm upgrade command or reapply the updated manifest.
github.com/longhorn/longhorn/releases/tag/v1.10.1
v1.10 へのアップグレード前に推奨される CRD 保存バージョンの確認

etcd または CRD の復元により、v1beta1 のデータが残ることがあります。アップグレード前に、CR を手動で v1beta2 に移行し、CRD の保存済みバージョンに v1beta1 が含まれていないことを確認するよう推奨されています。

> If your Longhorn cluster was initially deployed with a version earlier than v1.3.0, the Custom Resources (CRs) were created using the `v1beta1` APIs. While the upgrade from Longhorn v1.8 to v1.9 automatically migrates all CRs to the new `v1beta2` version, **a manual CR migration is strongly advised before upgrading from Longhorn `v1.9` to `v1.10`**.
> Certain operations, such as an `etcd` or CRD restore, may leave behind `v1beta1` data. Manually migrating your CRs ensures that all Longhorn data is properly updated to the `v1beta2` API, preventing potential compatibility issues and unexpected behavior with the new Longhorn version.
> Following the manual migration, **verify that `v1beta1` has been removed from the CRD stored versions** to ensure completion and a successful upgrade.
> For more details, see [Kubernetes official document for CRD storage version](https://kubernetes.io/docs/tasks/extend-kubernetes/custom-resources/custom-resource-definition-versioning/#upgrade-existing-objects-to-a-new-stored-version), and [Issue #11886](https://github.com/longhorn/longhorn/issues/11886).
github.com/longhorn/longhorn/releases/tag/v1.10.1
v1.9 から v1.10 へのアップグレードで必要な CRD のストレージバージョン移行

この移行では、まず settings-CR の UPDATE 検証を一時的に無効にし、storedVersions に v1beta1 を含む CRD に注釈を付けます。次に、該当する CRD の storedVersions を v1beta2 に変更し、その後、検証を再び有効にします。コマンドでは longhorn-system を使用します。カスタム名前空間を使用するインストールでは、代わりにその名前空間を使用してください。

> #### Migration Requirement Before Longhorn v1.10 Upgrade
>
> Before upgrading from Longhorn v1.9 to v1.10, perform the following manual CRD storage version migration.
>
> > **Note**: If your Longhorn installation uses a namespace other than `longhorn-system`, replace `longhorn-system` with your custom namespace throughout the commands.
>
> ```bash
> # Temporarily disable the CR validation webhook to allow updating read-only settings CRs.
> kubectl patch validatingwebhookconfiguration longhorn-webhook-validator \
>   --type=merge \
>   -p "$(kubectl get validatingwebhookconfiguration longhorn-webhook-validator -o json | \
>   jq '.webhooks[0].rules |= map(if .apiGroups == ["longhorn.io"] and .resources == ["settings"] then
>     .operations |= map(select(. != "UPDATE")) else . end)')"
>
> # Migrate CRDs that ever stored v1beta1 resources
> migration_time="$(date +%Y-%m-%dT%H:%M:%S)"
> crds=($(kubectl get crd -l app.kubernetes.io/name=longhorn -o json | jq -r '.items[] | select(.status.storedVersions | index("v1beta1")) | .metadata.name'))
> for crd in "${crds[@]}"; do
>   echo "Migrating ${crd} ..."
>   for name in $(kubectl -n longhorn-system get "$crd" -o jsonpath='{.items[*].metadata.name}'); do
>     # Attach additional annotations to trigger v1beta1 resource updating in the latest storage version.
>     kubectl patch "${crd}" "${name}" -n longhorn-system --type=merge -p='{"metadata":{"annotations":{"migration-time":"'"${migration_time}"'"}}}'
>  done
>  # Clean up the stored version in CRD status
>  kubectl patch crd "${crd}" --type=merge -p '{"status":{"storedVersions":["v1beta2"]}}' --subresource=status
> done
>
> # Re-enable the CR validation webhook.
> kubectl patch validatingwebhookconfiguration longhorn-webhook-validator \
>   --type=merge \
>   -p "$(kubectl get validatingwebhookconfiguration longhorn-webhook-validator -o json | \
>   jq '.webhooks[0].rules |= map(if .apiGroups == ["longhorn.io"] and .resources == ["settings"] then
>     .operations |= (. + ["UPDATE"] | unique) else . end)')"
> ```
github.com/longhorn/longhorn/releases/tag/v1.10.1
Longhorn CRD の v1.10 アップグレード前のバージョン確認

移行スクリプトの実行後、すべての Longhorn CRD の storedVersions には v1beta2 だけが記載され、v1beta1 は含まれていない必要があります。その後、v1.10 へのアップグレードは問題なく進められるとリリースノートに記載されています。

> After running the script, verify the CRD stored versions using this command:
>
> ```bash
> kubectl get crd -l app.kubernetes.io/name=longhorn -o=jsonpath='{range .items[*]}{.metadata.name}{": "}{.status.storedVersions}{"\n"}{end}'
> ```
> Crucially, all Longhorn CRDs MUST have only `"v1beta2"` listed in `storedVersions` (i.e., `"v1beta1"` must be completely absent) before proceeding to the v1.10 upgrade.
> Example of successful output:
> ```
> backingimagedatasources.longhorn.io: ["v1beta2"]
> backingimagemanagers.longhorn.io: ["v1beta2"]
> backingimages.longhorn.io: ["v1beta2"]
> backupbackingimages.longhorn.io: ["v1beta2"]
> backups.longhorn.io: ["v1beta2"]
> backuptargets.longhorn.io: ["v1beta2"]
> backupvolumes.longhorn.io: ["v1beta2"]
> engineimages.longhorn.io: ["v1beta2"]
> engines.longhorn.io: ["v1beta2"]
> instancemanagers.longhorn.io: ["v1beta2"]
> nodes.longhorn.io: ["v1beta2"]
> orphans.longhorn.io: ["v1beta2"]
> recurringjobs.longhorn.io: ["v1beta2"]
> replicas.longhorn.io: ["v1beta2"]
> settings.longhorn.io: ["v1beta2"]
> sharemanagers.longhorn.io: ["v1beta2"]
> snapshots.longhorn.io: ["v1beta2"]
> supportbundles.longhorn.io: ["v1beta2"]
> systembackups.longhorn.io: ["v1beta2"]
> systemrestores.longhorn.io: ["v1beta2"]
> volumeattachments.longhorn.io: ["v1beta2"]
> volumes.longhorn.io: ["v1beta2"]
> ```
> With these steps completed, the Longhorn upgrade to v1.10 should now proceed without issues.
github.com/longhorn/longhorn/releases/tag/v1.10.1
v1.10 へのアップグレード前に必要な CR 移行

必須のアップグレード前移行が適用されておらず、CR がすべて v1beta2 に移行されていない場合、longhorn-manager Pod が正常に動作しないことがあります。よくあるパッチエラーは、status.storedVersions に v1beta1 が残っていることを示しています。

> If you did not apply the required pre-upgrade migration steps and the CRs are not fully migrated to `v1beta2`, the `longhorn-manager` Pods may fail to operate correctly. A common error message for this issue is:
>
> ```
> Upgrade failed: cannot patch "backingimagedatasources.longhorn.io" with kind CustomResourceDefinition: CustomResourceDefinition.apiextensions.k8s.io "backingimagedatasources.longhorn.io" is invalid: status.storedVersions[0]: Invalid value: "v1beta1": missing from spec.versions; v1beta1 was previously a storage version, and must remain in spec.versions until a storage migration ensures no data remains persisted in v1beta1 and removes v1beta1 from status.storedVersions
> ```
github.com/longhorn/longhorn/releases/tag/v1.10.1
Longhorn v1.10 アップグレード再試行前に残る v1beta1 CR の移行

Longhorn が v1.9.x で安定した後、移行が必要です。

> ##### Post-Downgrade
> Once the downgrade is complete and the Longhorn system is stable on the v1.9.x version, you must immediately follow the steps outlined in the **Migration Requirement Before Longhorn v1.10 Upgrade**. This step is crucial to migrate all remaining `v1beta1` CRs to `v1beta2` before attempting the Longhorn v1.10 upgrade again.
github.com/longhorn/longhorn/releases/tag/v1.10.1
Longhorn v1.10.1 の最低 Kubernetes バージョン:v1.25
>  [!IMPORTANT]
**Ensure that your cluster is running Kubernetes v1.25 or later before installing Longhorn v1.10.1.**
github.com/longhorn/longhorn/releases/tag/v1.10.1
Longhorn v1.9.x から v1.10.1 へのアップグレードに必要な Kubernetes v1.25 以降
>  [!IMPORTANT]
**Ensure that your cluster is running Kubernetes v1.25 or later before upgrading from Longhorn v1.9.x to v1.10.1.**
github.com/longhorn/longhorn/releases/tag/v1.10.1
Longhorn のアップグレード経路と手順
Longhorn only allows upgrades from supported versions. For more information about upgrade paths and procedures, see [Upgrade](https://longhorn.io/docs/1.10.0/deploy/upgrade/) in the Longhorn documentation.
github.com/longhorn/longhorn/releases/tag/v1.10.1
既知の問題8
Longhorn Manager v1.10.1 イメージの既知の問題
> The `longhorn-manager:v1.10.1` image is affected by
github.com/longhorn/longhorn/releases/tag/v1.10.1
Longhorn manager の nil ポインタークラッシュに関する回帰v1.11.0で修正済み

特定の条件下で、manager が nil ポインター参照を起こし、予期せずクラッシュすることがあります。

> - Regression:
>   - [\[BUG\] invalid memory address or nil pointer dereference](https://github.com/longhorn/longhorn/issues/12233) that can trigger a nil-pointer dereference under certain conditions, potentially causing unexpected crashes.
github.com/longhorn/longhorn/releases/tag/v1.10.1
ブロックモードボリュームの移行が無期限に停止する問題v1.11.0で修正済み

新しい移行エンジンが実行状態へ遷移できず、VM の移行が停止したままになることがあります。

>   - [\[BUG\] Block Mode Volume Migration Stuck](https://github.com/longhorn/longhorn/issues/12311) that can cause block mode volume migration to get stuck indefinitely.
github.com/longhorn/longhorn/releases/tag/v1.10.1
V2 ボリュームのクローン作成中に発生する大幅な遅延

クローン処理中に、VolumeAttachment の検証 webhook が一部の CSI PublishVolume リクエストを拒否します。これにより、一時ボリュームのアタッチが数分遅れます。

> - Day-one issues:
>   - V2 volume clone:
>     - [\[BUG\] V2 Volume CSI Clone Slowness Caused by VolumeAttachment Webhook](https://github.com/longhorn/longhorn/issues/12328) that can lead to significant delays during V2 volume cloning operations.
github.com/longhorn/longhorn/releases/tag/v1.10.1
クローンしたボリュームをワークロードにアタッチできない問題v1.11.0で修正済み
>     - [\[BUG\] [Bug] A cloned volume cannot be attached to a workload](https://github.com/longhorn/longhorn/issues/12206) that prevents cloned volumes from being attached to workloads.
github.com/longhorn/longhorn/releases/tag/v1.10.1
レプリカの自動バランス調整が停止する可能性

ディスク逼迫時、停止中ボリュームの PVC ID が稼働中ボリュームの PVC ID より先にソートされると、稼働中ボリュームの自動バランス調整が行われない場合があります。

>   - Replica auto-balance:
>     - [\[BUG\] Replica auto balance disk pressure threshold stalled with stopped volumes](https://github.com/longhorn/longhorn/issues/10837) that can cause the replica auto-balance feature to stall when volumes are stopped under disk pressure conditions.
github.com/longhorn/longhorn/releases/tag/v1.10.1
longhorn-manager:v1.10.1 の既知の問題

このイメージには、nilポインター参照によるクラッシュ、ブロックモードのボリューム移行の停止、V2 ボリュームのクローン作成の遅延、クローン作成したボリュームをワークロードにアタッチできない問題、ディスク圧迫時に停止中のボリュームがあるとレプリカの自動バランス調整が停止する問題があります。緩和策として、longhorn-manager:v1.10.1-hotfix-2 が記載されています。

> The `longhorn-manager:v1.10.1` image is affected by
> - Regression:
>   - [\[BUG\] invalid memory address or nil pointer dereference](https://github.com/longhorn/longhorn/issues/12233) that can trigger a nil-pointer dereference under certain conditions, potentially causing unexpected crashes.
>   - [\[BUG\] Block Mode Volume Migration Stuck](https://github.com/longhorn/longhorn/issues/12311) that can cause block mode volume migration to get stuck indefinitely.
> - Day-one issues:
>   - V2 volume clone:
>     - [\[BUG\] V2 Volume CSI Clone Slowness Caused by VolumeAttachment Webhook](https://github.com/longhorn/longhorn/issues/12328) that can lead to significant delays during V2 volume cloning operations.
>     - [\[BUG\] [Bug] A cloned volume cannot be attached to a workload](https://github.com/longhorn/longhorn/issues/12206) that prevents cloned volumes from being attached to workloads.
>   - Replica auto-balance:
>     - [\[BUG\] Replica auto balance disk pressure threshold stalled with stopped volumes](https://github.com/longhorn/longhorn/issues/10837) that can cause the replica auto-balance feature to stall when volumes are stopped under disk pressure conditions.
> To mitigate the issues, replace `longhorn-manager:v1.10.1` with the hotfixed image `longhorn-manager:v1.10.1-hotfix-2`.
> Follow these steps to apply the update:
> 1. **Disable the upgrade version check**
>    - Helm users: Set `upgradeVersionCheck` to `false` in the `values.yaml` file.
>    - Manifest users: Remove the `--upgrade-version-check` flag from the deployment manifest.
>
> 2. **Update the `longhorn-manager` image**
>    - Change the image tag from `v1.10.1` to `v1.10.1-hotfix-2` in the appropriate file:
>      - For Helm: Update `values.yaml`
>      - For manifests: Update the deployment manifest directly.
>
> 3. **Proceed with the upgrade**
>    - Apply the changes using your standard Helm upgrade command or reapply the updated manifest.
github.com/longhorn/longhorn/releases/tag/v1.10.1
アップグレード失敗からの復旧には元の v1.9.x への強制ダウングレードが必要

kubectl を使用してインストールした環境では、ダウングレードの前に current-longhorn-version を元のバージョンにパッチしてください。

> To fix this issue, you must perform a **forced downgrade** back to the **exact Longhorn v1.9.x version** that was running before the failed upgrade attempt.
> ##### Downgrade Procedure (kubectl Installation)
> If Longhorn was installed using `kubectl`, you must patch the `current-longhorn-version` setting before downgrading. Replace `v1.9.x` with the original version before upgrade in the following commands.
>
> ```bash
> # Attaching annotation to allow patching current-longhorn-version.
> kubectl patch settings.longhorn.io current-longhorn-version -n longhorn-system --type=merge -p='{"metadata":{"annotations":{"longhorn.io/update-setting-from-longhorn":""}}}'
> # Temporarily override current version to allow old version installation
> # Replace the value `"v1.9.x" to the original version before upgrade.
> kubectl patch settings.longhorn.io current-longhorn-version -n longhorn-system --type=merge -p='{"value":"v1.9.x"}'
> ```
> After modifying `current-longhorn-version`, you can proceed to downgrade to the original Longhorn v1.9.x deployment.
github.com/longhorn/longhorn/releases/tag/v1.10.1

セキュリティ1

SPDK v25.05 の CVE 問題の修正

影響対象SPDK v25.05 コンポーネントを使用する構成
原文を表示
- [BACKPORT][v1.10.1][BUG] Fix SPDK v25.05 CVE issue [11970](https://github.com/longhorn/longhorn/issues/11970) - @derekbit @roger-ryao
github.com/longhorn/longhorn/releases/tag/v1.10.1

重大な修正20表面化しなかった不具合1

  • バックアップターゲットのメトリクスに関する不具合修正
    影響対象バックアップターゲットのメトリクスを使用する環境(推定)
    - [BACKPORT][v1.10.1][BUG] Backup target metric is broken [12089](https://github.com/longhorn/longhorn/issues/12089) - @mantissahz @roger-ryao
    github.com/longhorn/longhorn/releases/tag/v1.10.1
  • エラーメッセージのないブロックディスク削除失敗の修正
    影響対象ブロックディスクを削除する環境

    ブロックディスクの削除を試みた際に、この問題が発生することがありました。

    - [BACKPORT][v1.10.1][BUG] Block disk deletion fails without error message [11954](https://github.com/longhorn/longhorn/issues/11954) - @davidcheng0922 @roger-ryao
    github.com/longhorn/longhorn/releases/tag/v1.10.1
  • dataEngine 未設定時に CSIStorageCapacity の作成が通知なく失敗する問題の修正表面化しなかった不具合
    影響対象dataEngine なしで csi-provisioner を実行している環境

    この修正以前は、dataEngine が未設定の場合、csi-provisioner は CSIStorageCapacity の作成に失敗しても、そのことを通知しませんでした。

    - [BACKPORT][v1.10.1][BUG] csi-provisioner silently fails to create CSIStorageCapacity if dataEngine parameter is missing [11918](https://github.com/longhorn/longhorn/issues/11918) - @yangchiu @bachmanity1
    github.com/longhorn/longhorn/releases/tag/v1.10.1
  • インスタンスマネージャーの goroutine リークの修正
    影響対象V2 データエンジンを使用する環境

    このリークにより、時間の経過とともにメモリ使用量が増加し、安定性の問題が発生する可能性がありました。

    ### Goroutine Leak in Instance Manager (V2 Data Engine)
    Fixed a goroutine leak in the instance manager when using the V2 data engine. This issue could lead to increased memory usage and potential stability problems over time.
    For more details, see [Issue #11962](https://github.com/longhorn/longhorn/issues/11962).
    - [BACKPORT][v1.10.1][BUG] Goroutine leak in instance-manager when using v2 data engine [11962](https://github.com/longhorn/longhorn/issues/11962) - @PhanLe1010 @chriscchien
    github.com/longhorn/longhorn/releases/tag/v1.10.1
  • NVMe 割り込みモードでの V2 ボリュームのアタッチ失敗を修正
    影響対象割り込みモードを NVMe ディスクで使用する V2 ボリューム

    v1.10.0 では割り込みモードが AIO ディスクのみをサポートしていたため、NVMe ディスクでこのモードを使用する V2 ボリュームが、アタッチ中のまま無期限に進まなくなることがありました。NVMe ディスクの割り込みモードは v1.10.1 以降でサポートされます。

    ### V2 Volume Attachment Failure in Interrupt Mode
    Fixed an issue where V2 volumes using interrupt mode with NVMe disks could fail to complete the attachment process, causing volumes to remain stuck in the attaching state indefinitely.
    In Longhorn v1.10.0, interrupt mode supports only **AIO disks**. Interrupt mode for **NVMe disks** is supported starting in v1.10.1.
    For more details, see [Issue #11816](https://github.com/longhorn/longhorn/issues/11816).
    github.com/longhorn/longhorn/releases/tag/v1.10.1
  • IPv4 のみのノードでの Longhorn UI デプロイの修正
    影響対象IPv4 のみのノード上での Longhorn UI デプロイ

    v1.10.0 では、これらのノードへの UI のデプロイに失敗していました。IPv6 を必要とせず、IPv4 のみの構成に対応するようになりました。

    ### UI Deployment Failure on IPv4-Only Nodes
    Fixed a bug introduced in v1.10.0 where the Longhorn UI failed to deploy on nodes with only IPv4 enabled. The UI now correctly supports IPv4-only configurations without requiring IPv6.
    For more details, see [Issue #11875](https://github.com/longhorn/longhorn/issues/11875).
    - [BACKPORT][v1.10.1][BUG] UI fails to deploy when only IPv4 is enabled on nodes with v1.10.0 version [11875](https://github.com/longhorn/longhorn/issues/11875) - @yangchiu @c3y1huang
    github.com/longhorn/longhorn/releases/tag/v1.10.1
  • RWX 共有マネージャーの過剰なメモリー使用の修正
    影響対象RWX(ReadWriteMany)ボリューム

    共有マネージャーは、これらのボリュームで過剰なメモリーを消費していました。通常の運用では、メモリー使用量が安定するようになりました。

    ### Share Manager Excessive Memory Usage
    Fixed excessive memory consumption in the share manager for RWX (ReadWriteMany) volumes. The component now maintains stable memory usage under normal operation.
    For more details, see [Issue #12043](https://github.com/longhorn/longhorn/issues/12043).
    - [BACKPORT][v1.10.1][BUG] share-manager excessive memory usage [12043](https://github.com/longhorn/longhorn/issues/12043) - @derekbit @chriscchien
    github.com/longhorn/longhorn/releases/tag/v1.10.1
  • ネットワーク切断後にバッキングイメージのダウンロードが停止したままになる問題の解消
    影響対象バッキングイメージをダウンロードする構成

    ダウンロード中にネットワークが切断されると、バッキングイメージのダウンロードが停止したままになることがありました。

    - [BACKPORT][v1.10.1][BUG] Backing image download gets stuck after network disconnection [12094](https://github.com/longhorn/longhorn/issues/12094) - @COLDTURNIP @chriscchien
    github.com/longhorn/longhorn/releases/tag/v1.10.1
  • Longhorn engine コントローラーの nil ポインターによるパニック修正
    影響対象Longhorn engine が管理するワークロード(推定)

    エンジンで、longhorn-engine/pkg/controller/control.go:218 において、無効なメモリアドレスまたは nil ポインターの逆参照による SIGSEGV が発生し、パニックになる可能性がありました。

    - [BACKPORT][v1.10.1][BUG] panic: runtime error: invalid memory address or nil pointer dereference [signal SIGSEGV: segmentation violation code=0x1 at longhorn-engine/pkg/controller/control.go:218 +0x2de [12088](https://github.com/longhorn/longhorn/issues/12088) - @roger-ryao
    github.com/longhorn/longhorn/releases/tag/v1.10.1
  • v2 データエンジンにおける BDF 指定 NVME ディスクの検出修正
    影響対象v2 データエンジンで BDF 指定の NVME ディスクを使用する環境

    v2 データエンジンで、BDF で指定された NVME ディスクを検出できない場合がありました。

    - [BACKPORT][v1.10.1][BUG] NVME disk not found in v2 data engine (failed to find device for BDF) [12029](https://github.com/longhorn/longhorn/issues/12029) - @derekbit @roger-ryao
    github.com/longhorn/longhorn/releases/tag/v1.10.1
  • 定期ジョブ実行時の nil ポインターエラーの修正
    影響対象Longhornの定期ジョブを実行している環境

    定期ジョブの実行中に nil ポインターエラーが発生することがありました。リリースノートには、発生条件は記載されていません。

    - [BACKPORT][v1.10.1][BUG] NPE error during recurring job execution [11926](https://github.com/longhorn/longhorn/issues/11926) - @yangchiu @shuo-wu
    github.com/longhorn/longhorn/releases/tag/v1.10.1
  • Talos ノードでの V2 ボリューム作成の修正
    影響対象Talos ノードで v2 ボリュームを作成する構成

    このリリースより前は、Talos ノードで v2 ボリュームを作成すると失敗することがありました。

    - [BACKPORT][v1.10.1][BUG] v2 volume creation failed on talos nodes [12026](https://github.com/longhorn/longhorn/issues/12026) - @c3y1huang @chriscchien
    github.com/longhorn/longhorn/releases/tag/v1.10.1
  • エンジンイメージ削除後にDRボリュームが unknown のままになる問題の修正
    影響対象DR ボリューム

    アタッチ先のノードからエンジンイメージが削除されると、ボリュームが unknown のままになることがありました。

    - [BACKPORT][v1.10.1][BUG] DR volume gets stuck in `unknown` state if engine image is deleted from the attached node [11998](https://github.com/longhorn/longhorn/issues/11998) - @yangchiu @shuo-wu
    github.com/longhorn/longhorn/releases/tag/v1.10.1
  • ボリュームが attaching 状態で停止する問題の修正
    影響対象ボリュームのアタッチ

    エンジンイメージが関連するノードのいずれかにデプロイされていない場合、ボリュームが attaching のまま停止することがありました。

    - [BACKPORT][v1.10.1][BUG] Volume gets stuck in `attaching` state if engine image image is not deployed on one of nodes [11996](https://github.com/longhorn/longhorn/issues/11996) - @yangchiu @shuo-wu
    github.com/longhorn/longhorn/releases/tag/v1.10.1
  • V2 割り込みモード使用時の V2 ボリューム接続不具合の修正
    影響対象V2 割り込みモードで V2 ボリュームを使用する環境

    V2 割り込みモードを使用すると、V2 ボリュームの接続処理が停止したままになることがありました。

    - [BACKPORT][v1.10.1][BUG] V2 volume stuck in volume attachment (V2 interrupt mode) [11976](https://github.com/longhorn/longhorn/issues/11976) - @c3y1huang @chriscchien
    github.com/longhorn/longhorn/releases/tag/v1.10.1
  • RWX ボリューム使用時にプロセスがスリープする問題の修正
    影響対象RWX ボリューム

    このリリース以前は、RWX ボリュームを使用するプロセスが割り込み不能なスリープ状態に入ることがありました。

    - [BACKPORT][v1.10.1][BUG] RWX volume causes process uninterruptible sleep [11958](https://github.com/longhorn/longhorn/issues/11958) - @COLDTURNIP @chriscchien
    github.com/longhorn/longhorn/releases/tag/v1.10.1
  • アップグレード後の longhorn-manager 起動失敗の修正
    影響対象Longhorn 1.9.2 から 1.10.0 へのアップグレード

    Longhorn 1.9.2 から 1.10.0 にアップグレードした後、longhorn-manager が起動しないことがありました。

    - [BACKPORT][v1.10.1][BUG] longhorn-manager fails to start after upgrading from 1.9.2 to 1.10.0 [11865](https://github.com/longhorn/longhorn/issues/11865) - @derekbit @roger-ryao
    github.com/longhorn/longhorn/releases/tag/v1.10.1
  • 無効なメモリアドレスまたは nil ポインター参照の修正
    影響対象リリースノートに記載なし

    リリースノートには、影響を受ける操作、問題の発生条件、具体的な修正内容が記載されていません。

    - [BACKPORT][v1.10.1][BUG] invalid memory address or nil pointer dereference [11942](https://github.com/longhorn/longhorn/issues/11942) - @bachmanity1 @roger-ryao
    github.com/longhorn/longhorn/releases/tag/v1.10.1
  • longhorn-engine UI のパニック修正
    影響対象longhorn-engine の UI を使用する環境

    UI がパニックを起こす可能性がありましたが、リリースノートには、引き金となる操作や条件は記載されていません。

    - [BACKPORT][v1.10.1][BUG] longhorn-engine's UI panics [11901](https://github.com/longhorn/longhorn/issues/11901) - @derekbit @chriscchien
    github.com/longhorn/longhorn/releases/tag/v1.10.1
  • Longhorn Manager v1.10.0 の新しい Pod のデプロイ回帰への緩和
    影響対象Longhorn Manager v1.10.0 のインストール環境

    v1.10.0 へのアップグレード後、新しい Pod のデプロイに失敗することがありました。この回帰を緩和するため、v1.10.1 のリリース前にホットフィックスイメージが作成されました。

    - [HOTFIX] Create hotfixed image for longhorn-manager:v1.10.0 [11951](https://github.com/longhorn/longhorn/issues/11951) - @c3y1huang @roger-ryao
    github.com/longhorn/longhorn/releases/tag/v1.10.1
その他の変更16
  • ボリュームの予期しない切り離し時の Pod 自動削除を Kubernetes 組み込みワークロードに限定
    - [BACKPORT][v1.10.1][IMPROVEMENT] The `auto-delete-pod-when-volume-detached-unexpectedly` should only focus on the kubernetes builtin workload. [12125](https://github.com/longhorn/longhorn/issues/12125) - @derekbit @chriscchien
    github.com/longhorn/longhorn/releases/tag/v1.10.1
  • CSIStorageCapacity オブジェクトでの割り当て可能容量の報告
    - [BACKPORT][v1.10.1][IMPROVEMENT] `CSIStorageCapacity` objects must show schedulable (allocatable) capacity [12036](https://github.com/longhorn/longhorn/issues/12036) - @chriscchien @bachmanity1
    github.com/longhorn/longhorn/releases/tag/v1.10.1
  • ノードへのボリューム公開時のマウント失敗に関するエラーログの改善
    - [BACKPORT][v1.10.1][IMPROVEMENT] improve error logging for failed mounting during node publish volume [12033](https://github.com/longhorn/longhorn/issues/12033) - @COLDTURNIP @roger-ryao
    github.com/longhorn/longhorn/releases/tag/v1.10.1
  • Helm Chart defaultSettings の自動引用符付与と複数型への対応
    - [BACKPORT][v1.10.1][IMPROVEMENT] Improve Helm Chart defaultSettings handling with automatic quoting and multi-type support [12020](https://github.com/longhorn/longhorn/issues/12020) - @derekbit @chriscchien
    github.com/longhorn/longhorn/releases/tag/v1.10.1
  • エンジンの繰り返し再起動の回避
    - [BACKPORT][v1.10.1][IMPROVEMENT] Avoid repeat engine restart when there are replica unavailable during migration [11945](https://github.com/longhorn/longhorn/issues/11945) - @yangchiu @shuo-wu
    github.com/longhorn/longhorn/releases/tag/v1.10.1
  • GuaranteedInstanceManagerCPU の上限引き上げ
    - [BACKPORT][v1.10.1][IMPROVEMENT] Adjust maximum of GuaranteedInstanceManagerCPU to a big value [11968](https://github.com/longhorn/longhorn/issues/11968) - @mantissahz
    github.com/longhorn/longhorn/releases/tag/v1.10.1
  • Longhorn のインストール形態に関する利用状況メトリクスの追加
    - [BACKPORT][v1.10.1][IMPROVEMENT] Add usage metrics for Longhorn installation variant [11795](https://github.com/longhorn/longhorn/issues/11795) - @derekbit
    github.com/longhorn/longhorn/releases/tag/v1.10.1
  • 残存する backuptarget によるアンインストール阻害の修正
    - [BACKPORT][v1.10.1][BUG] Unable to complete uninstallation due to the remaining backuptarget [11964](https://github.com/longhorn/longhorn/issues/11964) - @mantissahz @roger-ryao
    github.com/longhorn/longhorn/releases/tag/v1.10.1
  • CSI node publish のマウントエラー処理に関する問題の掲載
    - [BACKPORT][v1.10.1][BUG] mounting error is not properly hanedled during CSI node publish volume [12008](https://github.com/longhorn/longhorn/issues/12008) - @COLDTURNIP
    github.com/longhorn/longhorn/releases/tag/v1.10.1
  • ディスク同時追加時の失敗を不具合として記載
    - [BACKPORT][v1.10.1][BUG] Adding multiple disks to the same node concurrently may occasionally fail [12018](https://github.com/longhorn/longhorn/issues/12018) - @davidcheng0922 @roger-ryao
    github.com/longhorn/longhorn/releases/tag/v1.10.1
  • 1.9.1から1.10.0へのアップグレード失敗の解消
    - [BUG] upgrading from 1.9.1 to 1.10.0 fails due to old resources still being in v1beta1 [11886](https://github.com/longhorn/longhorn/issues/11886) - @COLDTURNIP @roger-ryao
    github.com/longhorn/longhorn/releases/tag/v1.10.1
  • v2 データエンジン再有効化後の BDF 指定ブロック型ディスク再追加の修正
    - [BACKPORT][v1.10.1][BUG] Unable to re-add block-type disks by BDF after re-enable v2 data engine [12000](https://github.com/longhorn/longhorn/issues/12000) - @yangchiu @davidcheng0922
    github.com/longhorn/longhorn/releases/tag/v1.10.1
  • master-head でのシステムバックアップ・復元テストの失敗
    - [BACKPORT][v1.10.1][BUG] `test_system_backup_and_restore` test case failed on master-head [12005](https://github.com/longhorn/longhorn/issues/12005) - @derekbit @chriscchien
    github.com/longhorn/longhorn/releases/tag/v1.10.1
  • アクティブなレプリカ数が超過した場合のボリュームアップグレード失敗の修正
    - [BACKPORT][v1.10.1][BUG] Volume is unable to upgrade if the number of active replicas is larger than `volumme.spec.numberOfReplicas` [11895](https://github.com/longhorn/longhorn/issues/11895) - @yangchiu @derekbit
    github.com/longhorn/longhorn/releases/tag/v1.10.1
  • v2 ボリュームのデタッチ問題をバックポート済みとして記載
    - [BACKPORT][v1.10.1][BUG] Unable to detach a v2 volume after labeling `disable-v2-data-engine=true` [11801](https://github.com/longhorn/longhorn/issues/11801) - @mantissahz
    github.com/longhorn/longhorn/releases/tag/v1.10.1
  • UI の SAST チェックのリファクタリング
    - [BACKPORT][v1.10.1][REFACTOR] SAST checks for UI component [11992](https://github.com/longhorn/longhorn/issues/11992) - @chriscchien
    github.com/longhorn/longhorn/releases/tag/v1.10.1

整理した内容は AI が作成するため誤っている可能性があり、無保証で提供されます。