RATATOSK
← 전체 릴리스

Tektonv1.10.0

호환성 변경 4폐기 예정 1중요 수정 3기능·개선 1의존성 갱신 23기타 37

Tekton 알림 받기

확인할 변경이 있을 때만 주 1회, critical 보안 공지는 즉시 발송

업그레이드 전 확인

전제 조건1
Observability 메트릭 전송 대상 설정 변경

config-observability ConfigMap에서는 metrics.backend-destination 대신 metrics-protocol을 사용하고, 값을 prometheus, grpc 또는 http로 설정해야 합니다. 이미 Prometheus를 사용하고 있다면 변경할 필요가 없습니다.

  Upgrade actions:
  1. **Update Config**: Ensure your `config-observability` ConfigMap uses `metrics-protocol: prometheus` (or `grpc`/`http`) instead of the old `metrics.backend-destination`. If prometheus was already being used, no changes are needed.
github.com/tektoncd/pipeline/releases/tag/v1.10.0
업그레이드 안내1
전체 메트릭 마이그레이션 표
  See the [full migration table in PR #9043](https://github.com/tektoncd/pipeline/pull/9043) for complete details.
github.com/tektoncd/pipeline/releases/tag/v1.10.0

호환성 변경4

Tekton 인프라 메트릭 이름 변경

영향 대상Go 런타임, Workqueue 또는 Kubernetes 클라이언트 메트릭을 포함한 Tekton 인프라 메트릭을 수집하거나 조회하는 설정
필요 조치Prometheus를 이미 사용 중인 경우가 아니라면 config-observability에서 metrics.backend-destination 대신 metrics-protocol: prometheus(또는 grpc/http)를 사용하도록 설정 업데이트; 대시보드 쿼리를 새 메트릭 이름으로 업데이트하고 추가된 reason 레이블을 고려해 pipelinerun_duration_seconds 집계 확인

이 메트릭은 이전에 tekton_pipelines_controller_ 접두사를 사용했습니다. 예를 들어 tekton_pipelines_controller_workqueue_adds_total이 있었습니다. 이제 kn_workqueue_adds_total, http_client_request_duration_seconds, go_*와 같은 이름으로 내보냅니다.

원문 보기
* :rotating_light: **Metrics migration from OpenCensus to OpenTelemetry** (#9043)
  **ACTION REQUIRED**: Infrastructure metrics (Go runtime, Workqueue, K8s Client) have been renamed from the `tekton_pipelines_controller_` prefix to standard OpenTelemetry/Knative namespaces. The `reason` label has been added to duration metrics (`pipelinerun_duration_seconds`, `taskrun_duration_seconds`). The `reconcile_count` and `reconcile_latency` metrics have been removed.
github.com/tektoncd/pipeline/releases/tag/v1.10.0

Tekton 컨트롤러 reconcile 메트릭 제거

영향 대상두 커스텀 reconcile 메트릭 중 하나를 사용해 컨트롤러 성능을 모니터링하는 경우

PR에서는 컨트롤러 성능 모니터링에 kn_workqueue_process_duration_seconds와 kn_workqueue_adds_total을 사용하도록 안내합니다.

근거“3. Removed Metrics * `tekton_pipelines_controller_reconcile_count` and `tekton_pipelines_controller_reconcile_latency`: These custom reconcile metrics are no longer emitted. Users should rely on kn_workqueue_process_duration_seconds and kn_workqueue_adds_total to monitor controller performance.” tektoncd/pipeline/pull/9043 ↗
원문 보기
  **ACTION REQUIRED**: Infrastructure metrics (Go runtime, Workqueue, K8s Client) have been renamed from the `tekton_pipelines_controller_` prefix to standard OpenTelemetry/Knative namespaces. The `reason` label has been added to duration metrics (`pipelinerun_duration_seconds`, `taskrun_duration_seconds`). The `reconcile_count` and `reconcile_latency` metrics have been removed.
github.com/tektoncd/pipeline/releases/tag/v1.10.0

PipelineRun 및 TaskRun 메트릭의 OpenTelemetry 전환

영향 대상PipelineRun, TaskRun 또는 인프라 메트릭을 수집하거나 조회하는 구성(추정)
필요 조치Prometheus를 이미 사용 중인 경우가 아니라면 config-observability ConfigMap에서 metrics.backend-destination 대신 metrics-protocol: prometheus 또는 metrics-protocol: grpc/http를 사용하고, 대시보드는 이전 이름 대신 kn_workqueue_* 및 go_*를 사용하며, 기간 집계에는 reason 레이블을 반영해야 함

기존에는 인프라 메트릭에 tekton_pipelines_controller_ 접두사가 사용됐고, 기간 메트릭에는 reason 레이블이 없었으며, 커스텀 reconcile 메트릭 두 개가 제공됐습니다. 이제 인프라 메트릭에는 kn_workqueue_*, go_*를 비롯한 표준 OpenTelemetry 및 Knative 이름이 사용됩니다. 기간 메트릭에는 reason 레이블이 추가되고, 커스텀 reconcile 메트릭은 더 이상 제공되지 않습니다.

근거“* `tekton_pipelines_controller_reconcile_count` and `tekton_pipelines_controller_reconcile_latency`: These custom reconcile metrics are no longer emitted. Users should rely on” tektoncd/pipeline/pull/9043 ↗
원문 보기
* :sparkles: feat(metrics): Migrate from OpenCensus to OpenTelemetry (#9043)
  Migrated PipelineRun and TaskRun metrics to OpenTelemetry instruments (histograms, counters, gauges). Updated Knative to 1.19. See [Upgrade Notices](#upgrade-notices) for breaking changes and required actions.
github.com/tektoncd/pipeline/releases/tag/v1.10.0

메트릭 설정을 metrics-protocol로 전환

영향 대상config-observability ConfigMap의 메트릭 설정

기존 metrics.backend-destination 설정은 metrics-protocol로 대체되며, 값은 prometheus, grpc, http 중 하나입니다. 이미 Prometheus를 사용하는 설치 환경은 설정을 변경할 필요가 없습니다. 인프라 메트릭은 이제 tekton_pipelines_controller_ 접두사 대신 OpenTelemetry/Knative 표준 네임스페이스를 사용하며, reconcile_count와 reconcile_latency는 제거됩니다.

근거“1. **Update Config**: Ensure your `config-observability` ConfigMap uses `metrics-protocol: prometheus` (or `grpc`/`http`) instead of the old `metrics.backend-destination`. If prometheus was already being used, no changes are needed.” tektoncd/pipeline/releases/tag/v1.10.0 ↗
원문 보기
  Migrated PipelineRun and TaskRun metrics to OpenTelemetry instruments (histograms, counters, gauges). Updated Knative to 1.19. See [Upgrade Notices](#upgrade-notices) for breaking changes and required actions.
github.com/tektoncd/pipeline/releases/tag/v1.10.0

폐기 예정1

호환성을 위해 사용되지 않는 featureFlags.EnableTektonOCIBundles 필드 허용

영향 대상featureFlags.EnableTektonOCIBundles를 포함하는 PipelineRun 및 TaskRun 리소스(추정)
제거 시점미상

이전에는 EnableTektonOCIBundles를 알 수 없는 필드로 처리했습니다. 이제는 이 필드를 받아들이지만 아무 효과도 없습니다. v0.62.x 이전에 생성된 PipelineRun을 삭제할 수 있도록 필드를 유지합니다.

원문 보기
* :bug: accept featureFlags.EnableTektonOCIBundles to fix unknown field error (#8996)
github.com/tektoncd/pipeline/releases/tag/v1.10.0

중요 수정3

  • 중복된 ResolutionRequest 단축 이름 제거
    영향 대상Kubernetes 1.33+에서 ResolutionRequest CRD를 사용하는 설치 환경

    Kubernetes 1.33+에서는 중복된 단축 이름으로 인해 CRD에 ShortNamesConflict 조건이 발생했습니다.

    * :bug: fix: Remove redundant shortNames from ResolutionRequest CRD (#9398)
      Remove redundant shortNames from ResolutionRequest CRD that caused ShortNamesConflict on Kubernetes 1.33+
    github.com/tektoncd/pipeline/releases/tag/v1.10.0
  • PipelineRun 검증에서 기본값의 비매개변수 변수 허용
    영향 대상파이프라인 매개변수 기본값에서 매개변수가 아닌 변수를 사용하는 PipelineRun

    이전에는 파이프라인 매개변수의 기본값이 $(context.pipelineRun.name) 같은 값을 참조하면 검증이 실패했습니다. 이제 이러한 기본값도 오류 없이 검증됩니다.

    * :bug: fix(pipelines): allow pipeline param defaults to use non-param variables (#9386)
      Fixed a bug which caused PipelineRun validation to fail when a pipeline parameter's default value referenced a non-parameter variable (e.g. `$(context.pipelineRun.name)`)
    github.com/tektoncd/pipeline/releases/tag/v1.10.0
  • 실패·취소·시간 초과 태스크의 출력도 포함하는 파이프라인 수준 결과
    영향 대상실패, 취소 또는 시간 초과된 태스크의 출력을 참조하는 파이프라인 수준 결과가 있는 PipelineRuns

    이전에는 이러한 참조가 해석되지 않은 변수 문자열로 남을 수 있었습니다. 이제 실패, 취소 또는 시간 초과 상태로 완료된 태스크의 결과가 파이프라인 수준 결과에 포함됩니다.

    * :bug: fix: pipeline-level results not recorded from failed tasks (#9367)
      Pipeline-level results now include results from failed, cancelled, and timed-out tasks, fixing cases where results referencing non-successful task outputs were left as unresolved variable strings.
    github.com/tektoncd/pipeline/releases/tag/v1.10.0

기능·개선1

  • Git 리졸버의 SHA-256 커밋 해시 인식
    * :sparkles: feat: Add SHA-256 support for Git resolver revision validation (#9278)
      Git resolver now supports SHA-256 commit hashes for revision validation.
    github.com/tektoncd/pipeline/releases/tag/v1.10.0

의존성 갱신23

    그 외 23건 · 보안 언급 없음
    • Migrated PipelineRun and TaskRun metrics to OpenTelemetry instruments (histograms, counters, gauges). Updated Knative to 1.19. See [Upgrade Notices](#upgrade-notices) for breaking changes and required actions.
    • * :hammer: build(deps): bump golang.org/x/crypto from 0.36.0 to 0.45.0 in /test/resolver-with-timeout (#9426)
    • * :hammer: build(deps): bump opentelemetry exporter packages to v1.39.0 (#9332)
    • * :hammer: build(deps): bump github.com/google/go-containerregistry from 0.21.0 to 0.21.1 (#9433)
    • * :hammer: build(deps): bump github.com/google/go-containerregistry from 0.20.7 to 0.21.0 (#9418)
    • * :hammer: build(deps): bump google.golang.org/grpc from 1.79.0 to 1.79.1 (#9392)
    • * :hammer: build(deps): bump github.com/jenkins-x/go-scm from 1.15.16 to 1.15.17 (#9391)
    • * :hammer: build(deps): bump google.golang.org/grpc from 1.78.0 to 1.79.0 (#9389)
    • * :hammer: build(deps): bump k8s.io/code-generator from 0.32.11 to 0.32.12 (#9388)
    • * :hammer: build(deps): bump k8s.io/apiextensions-apiserver from 0.32.11 to 0.32.12 (#9385)
    • * :hammer: build(deps): bump k8s.io/apimachinery from 0.33.7 to 0.33.8 (#9384)
    • * :hammer: build(deps): bump k8s.io/client-go from 0.32.11 to 0.32.12 (#9383)
    • * :hammer: build(deps): bump github/codeql-action from 4.32.1 to 4.32.2 (#9374)
    • * :hammer: build(deps): bump the all group in /tekton with 4 updates (#9373)
    • * :hammer: build(deps): bump step-security/harden-runner from 2.14.1 to 2.14.2 (#9372)
    • * :hammer: build(deps): bump tj-actions/changed-files from 47.0.1 to 47.0.2 (#9371)
    • * :hammer: build(deps): bump chainguard-dev/actions from 1.5.14 to 1.5.16 (#9370)
    • * :hammer: build(deps): bump golang.org/x/crypto from 0.47.0 to 0.48.0 (#9369)
    • * :hammer: build(deps): bump go.opentelemetry.io/otel/exporters/otlp/otlptrace/otlptracehttp from 1.39.0 to 1.40.0 (#9363)
    • * :hammer: build(deps): bump go.opentelemetry.io/otel/exporters/otlp/otlptrace/otlptracehttp from 1.37.0 to 1.40.0 (#9345)
    • * :hammer: build(deps): bump google.golang.org/grpc from 1.77.0 to 1.78.0 (#9337)
    • * :hammer: build(deps): bump github.com/spiffe/spire-api-sdk from 1.14.0 to 1.14.1 (#9336)
    • * :hammer: build(deps): bump sigstore/sigstore from 1.9.5 to 1.10.4 (#9331)
    기타37

    정리 내용은 AI가 작성하므로 틀릴 수 있으며, 보증 없이 제공합니다.