RATATOSK
← 전체 릴리스

Tektonv1.0.1

보안 2호환성 변경 1중요 수정 3기능·개선 1의존성 갱신 1기타 12

Tekton 알림 받기

확인할 변경이 있을 때만 주 1회, critical 보안 공지는 즉시 발송

보안2critical1medium1

Git 리졸버 경로 순회 수정

critical
영향 대상테넌트가 ResolutionRequests를 생성할 수 있는 Git 리졸버 사용 설치

이번 릴리스 전에는 테넌트가 pathInRepo의 경로 순회를 이용해 리졸버 Pod의 임의 파일을 읽을 수 있었습니다. 여기에는 ResolutionRequests를 사용하거나 리졸버를 사용하는 TaskRuns 및 PipelineRuns를 통해 읽을 수 있는 ServiceAccount 토큰도 포함됩니다. 이제 리졸버는 .. 구성 요소가 포함된 경로를 거부하고, 공격자가 제어하는 저장소의 심볼릭 링크를 통한 경로 탈출을 차단합니다.

원문 보기
- **[GHSA-j5q5-j9gm-2w5c](https://github.com/tektoncd/pipeline/security/advisories/GHSA-j5q5-j9gm-2w5c)** (Critical): Path traversal in git resolver allows reading arbitrary files from the resolver pod. Fixed by validating the `pathInRepo` parameter to prevent directory traversal.
github.com/tektoncd/pipeline/releases/tag/v1.0.1

긴 resolver 이름으로 인한 컨트롤러 패닉 수정

medium
영향 대상사용자 지정 resolver 이름이 31자 이상인 TaskRuns 및 PipelineRuns

수정 전에는 이러한 리소스 중 하나에 대해 결정적 ResolutionRequest 이름을 생성하다가 컨트롤러가 패닉을 일으킬 수 있었습니다. 이로 인해 재시작 루프가 발생해 클러스터 전체의 조정이 차단됐습니다. 이제 컨트롤러는 결정적 ResolutionRequest 이름을 생성할 때 resolver 이름 접두부를 줄이고 전체 해시는 유지합니다.

원문 보기
- **[GHSA-cv4x-93xx-wgfj](https://github.com/tektoncd/pipeline/security/advisories/GHSA-cv4x-93xx-wgfj)** / CVE-2026-33022 (Medium): Controller panic via long resolver name in TaskRun/PipelineRun. A user with permission to create TaskRuns or PipelineRuns could crash the controller into a restart loop by setting a resolver name of 31+ characters, causing denial of service cluster-wide. Thanks to @1seal for reporting this vulnerability.
github.com/tektoncd/pipeline/releases/tag/v1.0.1

호환성 변경1

로그 결과 사이드카 완료 폴링 간격 설정 가능

영향 대상로그 결과 사이드카를 사용해 결과를 생성하는 설정

기본 폴링 간격은 100ms이며 CPU 사용량을 줄입니다. 간격을 더 길게 설정하면 CPU 부하를 더 줄일 수 있지만 결과 수집이 지연될 수 있습니다. 간격을 더 짧게 설정하면 더 빠른 피드백을 얻을 수 있지만 CPU 사용량이 늘어날 수 있습니다.

원문 보기
* :hammer: The log results sidecar has been optimized to significantly reduce CPU utilization. Operators can tune the system for their environment—using a higher interval to reduce CPU load in production, or a lower interval for faster feedback in development (#8913)
github.com/tektoncd/pipeline/releases/tag/v1.0.1

중요 수정3

  • tekton_pipelines_controller_running_pipelineruns가 실행 중인 PipelineRun만 집계
    영향 대상tekton_pipelines_controller_running_pipelineruns 메트릭을 사용하는 설치 환경(추정)
    * :bug: fix: exclude pending PipelineRuns from `tekton_pipelines_controller_running_pipelineruns` metric (#8979) — Fixed metric to count only running PipelineRuns
    github.com/tektoncd/pipeline/releases/tag/v1.0.1
  • v1beta1 파이프라인 검증 패닉 수정
    영향 대상v1beta1 API와 매트릭스 파라미터를 사용하는 파이프라인

    매트릭스 파라미터의 유효하지 않은 result 참조를 검증하는 과정에서 패닉이 발생할 수 있었습니다. 업그레이드 후에는 이 검증 사례에서 더 이상 패닉이 발생하지 않습니다.

    * :bug: fix: panic in v1beta1 matrix validation for invalid result refs (#9212) — Resolved an issue where Pipelines with invalid result references in matrix parameters would cause a panic during validation (v1beta1 API)
    github.com/tektoncd/pipeline/releases/tag/v1.0.1
  • gitToken을 사용하는 Git 리졸버 인증 수정
    영향 대상HTTP 토큰 기반 인증에 gitToken과 gitTokenKey를 사용하는 Git 리졸버 설정

    Git 리졸버가 HTTP 토큰 기반 인증에 gitToken과 gitTokenKey를 사용하면 해당 자격 증명으로 인증하지 못했습니다. 이제 리졸버가 수행하는 Git 작업은 원격 인증에 제공된 gitToken을 사용합니다.

    * :bug: fix(#8940): Fix token-authentication header in git resolver (#8947) — Before this change, there was a regression in which the git resolver was not authenticating with the provided `gitToken` and `gitTokenKey`, breaking the git resolver's http token-based auth. After this change, all git operations performed by the git resolver use the provided `gitToken` for remote authentication.
    github.com/tektoncd/pipeline/releases/tag/v1.0.1

기능·개선1

의존성 갱신1

    그 외 1건 · 보안 언급 없음
    • * :hammer: build: bump Go version to 1.24.0 and fix e2e test infrastructure (#9318)
    기타12

    정리 내용은 AI가 작성하므로 틀릴 수 있으며, 보증 없이 제공합니다.