# Tekton v1.0.1

2026-03-18 · [릴리스 노트 원문](https://github.com/tektoncd/pipeline/releases/tag/v1.0.1) · [전체 정리](https://ratatosk.io/ko/releases/tekton/v1.0.1)

보안 2 (critical 1) · 호환성 변경 1 · 중요 수정 3 · 기능·개선 1 · 의존성 갱신 1 · 기타 12

## 보안 (2)

### [critical] Git 리졸버 경로 순회 수정

- 영향 대상: 테넌트가 `ResolutionRequests`를 생성할 수 있는 Git 리졸버 사용 설치
- [CVE-2026-33211](https://www.cve.org/CVERecord?id=CVE-2026-33211), [GHSA-j5q5-j9gm-2w5c](https://github.com/tektoncd/pipeline/security/advisories/GHSA-j5q5-j9gm-2w5c)

이번 릴리스 전에는 테넌트가 `pathInRepo`의 경로 순회를 이용해 리졸버 Pod의 임의 파일을 읽을 수 있었습니다. 여기에는 `ResolutionRequests`를 사용하거나 리졸버를 사용하는 `TaskRuns` 및 `PipelineRuns`를 통해 읽을 수 있는 ServiceAccount 토큰도 포함됩니다. 이제 리졸버는 `..` 구성 요소가 포함된 경로를 거부하고, 공격자가 제어하는 저장소의 심볼릭 링크를 통한 경로 탈출을 차단합니다.

> - **[GHSA-j5q5-j9gm-2w5c](https://github.com/tektoncd/pipeline/security/advisories/GHSA-j5q5-j9gm-2w5c)** (Critical): Path traversal in git resolver allows reading arbitrary files from the resolver pod. Fixed by validating the `pathInRepo` parameter to prevent directory traversal.

### [medium] 긴 resolver 이름으로 인한 컨트롤러 패닉 수정

- 영향 대상: 사용자 지정 resolver 이름이 31자 이상인 TaskRuns 및 PipelineRuns
- [CVE-2026-33022](https://www.cve.org/CVERecord?id=CVE-2026-33022), [GHSA-cv4x-93xx-wgfj](https://github.com/tektoncd/pipeline/security/advisories/GHSA-cv4x-93xx-wgfj)

수정 전에는 이러한 리소스 중 하나에 대해 결정적 `ResolutionRequest` 이름을 생성하다가 컨트롤러가 패닉을 일으킬 수 있었습니다. 이로 인해 재시작 루프가 발생해 클러스터 전체의 조정이 차단됐습니다. 이제 컨트롤러는 결정적 `ResolutionRequest` 이름을 생성할 때 resolver 이름 접두부를 줄이고 전체 해시는 유지합니다.

> - **[GHSA-cv4x-93xx-wgfj](https://github.com/tektoncd/pipeline/security/advisories/GHSA-cv4x-93xx-wgfj)** / CVE-2026-33022 (Medium): Controller panic via long resolver name in TaskRun/PipelineRun. A user with permission to create TaskRuns or PipelineRuns could crash the controller into a restart loop by setting a resolver name of 31+ characters, causing denial of service cluster-wide. Thanks to @1seal for reporting this vulnerability.

## 호환성 변경 (1)

### 로그 결과 사이드카 완료 폴링 간격 설정 가능

- 영향 대상: 로그 결과 사이드카를 사용해 결과를 생성하는 설정

기본 폴링 간격은 `100ms`이며 CPU 사용량을 줄입니다. 간격을 더 길게 설정하면 CPU 부하를 더 줄일 수 있지만 결과 수집이 지연될 수 있습니다. 간격을 더 짧게 설정하면 더 빠른 피드백을 얻을 수 있지만 CPU 사용량이 늘어날 수 있습니다.

> * :hammer: The log results sidecar has been optimized to significantly reduce CPU utilization. Operators can tune the system for their environment—using a higher interval to reduce CPU load in production, or a lower interval for faster feedback in development (#8913)

## 중요 수정 (3)

### `tekton_pipelines_controller_running_pipelineruns`가 실행 중인 PipelineRun만 집계

- 영향 대상: `tekton_pipelines_controller_running_pipelineruns` 메트릭을 사용하는 설치 환경 (추정)

> * :bug: fix: exclude pending PipelineRuns from `tekton_pipelines_controller_running_pipelineruns` metric (#8979) — Fixed metric to count only running PipelineRuns

### `v1beta1` 파이프라인 검증 패닉 수정

- 영향 대상: `v1beta1` API와 매트릭스 파라미터를 사용하는 파이프라인

매트릭스 파라미터의 유효하지 않은 result 참조를 검증하는 과정에서 패닉이 발생할 수 있었습니다. 업그레이드 후에는 이 검증 사례에서 더 이상 패닉이 발생하지 않습니다.

> * :bug: fix: panic in v1beta1 matrix validation for invalid result refs (#9212) — Resolved an issue where Pipelines with invalid result references in matrix parameters would cause a panic during validation (v1beta1 API)

### `gitToken`을 사용하는 Git 리졸버 인증 수정

- 영향 대상: HTTP 토큰 기반 인증에 `gitToken`과 `gitTokenKey`를 사용하는 Git 리졸버 설정

Git 리졸버가 HTTP 토큰 기반 인증에 `gitToken`과 `gitTokenKey`를 사용하면 해당 자격 증명으로 인증하지 못했습니다. 이제 리졸버가 수행하는 Git 작업은 원격 인증에 제공된 `gitToken`을 사용합니다.

> * :bug: fix(#8940): Fix token-authentication header in git resolver (#8947) — Before this change, there was a regression in which the git resolver was not authenticating with the provided `gitToken` and `gitTokenKey`, breaking the git resolver's http token-based auth. After this change, all git operations performed by the git resolver use the provided `gitToken` for remote authentication.

## 기능·개선 (1)

- Pipeline v1beta1에서 `onError` 파라미터 참조 허용

## 의존성 갱신 (1)

그 외 1건 · 보안 언급 없음

- `* :hammer: build: bump Go version to 1.24.0 and fix e2e test infrastructure (#9318)`

## 기타 (12)

- Git resolver 서브프로세스의 Pod 환경 상속
- 완료된 `TaskRuns`와 `PipelineRuns`에서 finalizer만 변경하는 업데이트 허용
- CI 워크플로에서 GitHub Actions를 커밋 SHA로 고정
- `release-v1.0.x` CI 워크플로에 `ci-summary` 잡 추가
- SPIRE 엔드투엔드 테스트 이미지 변경: `k8s.gcr.io/sig-storage/csi-node-driver-registrar:v2.0.1`
- Docker Hub에서 `mirror.gcr.io`로 옮긴 테스트 이미지
- dind-sidecar 테스트에 `startupProbe` 추가
- 리졸버 매니페스트에서 `TEKTON_HUB_API` 기본값을 빈 값으로 변경
- http-resolver 예제에서 Tekton Hub 대신 ArtifactHub 사용
- 릴리스 파이프라인 plumbing revision 업데이트
- 릴리스 파이프라인 `precheck` 태스크가 업데이트된 plumbing 리비전 사용
- ArtifactHub를 안내하도록 문서 업데이트

---

정리 내용은 AI가 작성하므로 틀릴 수 있으며, 보증 없이 제공합니다.
