# Kubernetes v1.35.9

2026-09-23 · [릴리스 노트 원문](https://github.com/kubernetes/kubernetes/releases/tag/v1.35.9) · [전체 정리](https://ratatosk.io/ko/releases/kubernetes/v1.35.9)

보안 4 · 호환성 변경 1 · 폐기 예정 1 · 중요 수정 2 · 의존성 갱신 2 · 기타 3

## 보안 (4)

### [medium] Windows `kubectl cp` 임의 경로 파일 쓰기 수정

- 영향 대상: 릴리스 노트에 언급 없음
- [CVE-2026-19444](https://github.com/kubernetes/kubernetes/issues/141294)

공격자가 소스 컨테이너를 제어하면 악의적인 아카이브 경로가 지정된 대상에서 벗어나 로컬 사용자의 시스템 권한으로 허용되는 모든 위치에 파일을 쓸 수 있었습니다. 업그레이드 후에는 해당 경로가 대상에서 벗어날 수 없습니다.

보안 공지:

> A path traversal vulnerability exists in the `kubectl cp` command when it is run on Windows. `kubectl cp` copies files between containers and the user machine. To copy files *from* a container, Kubernetes runs `tar` inside the container to create a tar archive, copies it over the network, and `kubectl` unpacks it on the user's machine. If the `tar` binary in the container is malicious, it could run any code and output unexpected, malicious results.
> An attacker who controls the contents of a container could use this to write files to arbitrary paths on the user's machine when `kubectl cp` is called, limited only by the system permissions of the local user. This issue only affects clients on Windows platforms.
> You are affected if you run the `kubectl` client on Windows and use `kubectl cp` to copy files *from* a container whose contents you do not fully control.
> Prior to upgrading, this vulnerability can be mitigated by only copying files from containers you trust, or by avoiding `kubectl cp` from untrusted containers on Windows.

https://github.com/kubernetes/kubernetes/issues/141294

보안 공지:

> kubectl cp path traversal on Windows allows arbitrary file writes

https://github.com/kubernetes/kubernetes/issues/141294

### [medium] StatefulSet 교차 네임스페이스 Pod 생성 취약점 수정

- 영향 대상: 릴리스 노트에 언급 없음
- [CVE-2026-2270](https://github.com/kubernetes/kubernetes/issues/142097)

네임스페이스 범위에서 `StatefulSet` 및 `ControllerRevision` 오브젝트에 대한 쓰기 권한이 있는 공격자는 다른 네임스페이스에 Pod를 만들고 메타데이터와 spec을 제어할 수 있었습니다. Pod는 피해자 네임스페이스에 있는 기존 `StatefulSet`을 가리키는 유효한 `OwnerReference`가 없으면 삭제되었습니다. 수정된 버전은 `ControllerRevision`에서 `spec` 필드만 복원합니다.

보안 공지:

> A confused deputy attack exists in the StatefulSet controller that allows a user with namespace-scoped write permissions on StatefulSet and ControllerRevision objects to create a cross-namespace pod. An attacker exploiting this vulnerability would have full control over the resulting pod’s metadata and specification, including namespace selection. Note that the cross-namespace pod will be immediately deleted by the garbage collector unless the attacker is able to construct a valid StatefulSet OwnerReference. This would require referencing the UID of an existing StatefulSet in the victim’s namespace.
> This issue can be mitigated by upgrading to a fixed kube-controller-manager version. The fixed versions are patched to ensure that only the spec field in StatefulSets will be restored from ControllerRevisions.

https://github.com/kubernetes/kubernetes/issues/142097

보안 공지:

> StatefulSet and ControllerRevision write permissions allow cross-namespace pod creation

https://github.com/kubernetes/kubernetes/issues/142097

### [medium] Windows kubelet의 UNC 심볼릭 링크 취약점 수정

- 영향 대상: 릴리스 노트에 언급 없음
- [CVE-2026-76654](https://github.com/kubernetes/kubernetes/issues/142098)

Pod의 `volumeMount` `subPath`가 공격자가 제어하는 UNC 경로의 네트워크 공유를 가리키는 심볼릭 링크인 경우, kubelet이 NTLM 인증을 시도해 kubelet을 실행하는 계정의 NetNTLMv2 해시가 노출됐습니다. 수정된 버전은 Windows에서 UNC 경로를 대상으로 하는 심볼릭 링크를 거부합니다.

보안 공지:

> CVSS Rating: [CVSS:3.1/AV:N/AC:H/PR:H/UI:N/S:C/C:H/I:N/A:N](https://www.first.org/cvss/calculator/3.1#CVSS:3.1/AV:N/AC:H/PR:H/UI:N/S:C/C:H/I:N/A:N) - Medium (5.8)
> An NTLM coercion vulnerability exists on Windows nodes when the subPath supplied in a pod's volumeMounts is set to a symbolic link that points to an attacker-controlled network share. When a kubelet resolves symlinks, it does not reject a target that resolves to a UNC path. As a result, the kubelet will transparently attempt to authenticate to the share using NTLM.
> This allows an attacker to obtain the NetNTLMv2 hash of the account under which the kubelet is running. An attacker could then attempt to crack the hash to retrieve the corresponding password or relay it to impersonate the node, if the node is domain-joined.
> This issue can be mitigated by upgrading to a fixed kubelet version. The fixed versions update kubelet to refuse UNC symlink targets on Windows.

https://github.com/kubernetes/kubernetes/issues/142098

보안 공지:

> Subpath symlinking on Windows nodes permits NTLM coercion

https://github.com/kubernetes/kubernetes/issues/142098

### DRA 할당기에서 클레임별 제한을 초과한 `ResourceClaim` 요청 거부

- 영향 대상: kube-scheduler에서 `ResourceClaim`을 대상으로 하는 DRA 할당 (추정)

디바이스 요청 개수가 클레임별 제한을 초과하면 네이티브 `int` 합계에서 오버플로가 발생해 제한 검사를 우회하고, 결과 슬라이스를 할당하는 중 kube-scheduler가 충돌할 수 있었습니다.

> - Kube-scheduler: a ResourceClaim whose device request counts add up past the int range no longer crashes the scheduler or skips the `firstAvailable` fallback in the DRA allocator. A request over the per-claim device limit is rejected with an error naming it, and an oversized `firstAvailable` alternative falls through to a smaller one. ([#141924](https://github.com/kubernetes/kubernetes/pull/141924), [@thc1006](https://github.com/thc1006)) [SIG Node]

https://github.com/kubernetes/kubernetes/blob/master/CHANGELOG/CHANGELOG-1.35.md

## 호환성 변경 (1)

### kubelet 폴백 메트릭 버전 레이블 업데이트

- 영향 대상: `RuntimeConfig`를 지원하지 않는 CRI 구현을 사용하는 kubelet 설정 (추정)

이 상황에서 kubelet이 설정의 `cgroupDriver`로 폴백할 때 `CRILosingSupport`는 `version` 레이블 값으로 `1.36.0`을 사용했습니다. 이제는 `1.38.0`을 사용합니다.

근거: “kubeletmetrics.CRILosingSupport.WithLabelValues("1.38.0").Inc()” https://github.com/kubernetes/kubernetes/pull/139268

> - Kubelet: defer the configurations flags (and the related fallback behavior) deprecation removal timeline from 1.37 to 1.38 to align with containerd v1.7 support

https://github.com/kubernetes/kubernetes/blob/master/CHANGELOG/CHANGELOG-1.35.md

## 폐기 예정 (1)

### kubeadm `cgroupDriver` 폴백 제거 경고 기준을 1.38로 변경

- 영향 대상: kubeadm `ContainerRuntimeVersion` 프리플라이트 검사에서 `RuntimeConfig`를 지원하지 않는 런타임을 사용하는 경우
- 제거 시점: 1.38

이전에는 경고에서 폴백 제거 시점을 1.36으로 안내했습니다. 이제 이러한 구성에서는 kubelet 버전이 1.38보다 낮을 때 프리플라이트 경고가 표시됩니다.

>   kubeadm: the preflight check `ContainerRuntimeVersion` validates if the installed container runtime supports the `RuntimeConfig` gRPC method. For older kubelet versions than 1.38, it will return a preflight warning. ([#139268](https://github.com/kubernetes/kubernetes/pull/139268), [@carlory](https://github.com/carlory)) [SIG Cluster Lifecycle, Node and Testing]

https://github.com/kubernetes/kubernetes/blob/master/CHANGELOG/CHANGELOG-1.35.md

## 중요 수정 (2)

### 지나치게 큰 대안으로 인한 DRA allocator 폴백 수정

- 영향 대상: `ResourceClaim`의 `firstAvailable` 대안을 사용하는 DRA allocator (추정)

지나치게 큰 `firstAvailable` 대안이 더 작은 대안보다 앞에 있으면, allocator가 더 작은 폴백을 건너뛸 수 있었습니다. 이제 지나치게 큰 대안을 제거하고 더 작은 대안을 선택할 수 있습니다.

> - Kube-scheduler: a ResourceClaim whose device request counts add up past the int range no longer crashes the scheduler or skips the `firstAvailable` fallback in the DRA allocator. A request over the per-claim device limit is rejected with an error naming it, and an oversized `firstAvailable` alternative falls through to a smaller one. ([#141924](https://github.com/kubernetes/kubernetes/pull/141924), [@thc1006](https://github.com/thc1006)) [SIG Node]

https://github.com/kubernetes/kubernetes/blob/master/CHANGELOG/CHANGELOG-1.35.md

### 공유 kubelet 설정에 노드별 resolver 경로를 기록하지 않는 `kubeadm init`

- 영향 대상: systemd-resolved를 사용하고 `kubeadm init`을 실행하는 구성 (추정)

> - Kubeadm: no longer persists a node-specific systemd-resolved resolvConf path in the cluster-wide kubelet-config ConfigMap during init. ([#141629](https://github.com/kubernetes/kubernetes/pull/141629), [@HirazawaUi](https://github.com/HirazawaUi)) [SIG Cluster Lifecycle]

https://github.com/kubernetes/kubernetes/blob/master/CHANGELOG/CHANGELOG-1.35.md

## 의존성 갱신 (2)

그 외 2건 · 보안 언급 없음

- `- Kubernetes is now built using Go 1.26.8 ([#142182](https://github.com/kubernetes/kubernetes/pull/142182), [@cpanato](https://github.com/cpanato)) [SIG Release and Testing]`
- `- Kubernetes is now built using Go 1.26.8 ([#142182](https://github.com/kubernetes/kubernetes/pull/142182), [@cpanato](https://github.com/cpanato)) [SIG Release and Testing]`

## 기타 (3)

- Kubelet 설정 플래그 및 폴백 제거 시점 1.38로 연기
- 컨포먼스에서 일반 e2e로 강등된 테스트 3개
- 컨포먼스에서 일반 e2e로 이동한 인플레이스 Pod 리사이즈 테스트 3개

---

정리 내용은 AI가 작성하므로 틀릴 수 있으며, 보증 없이 제공합니다.
