# CRI-O v1.37.4

2026-11-16 · [릴리스 노트 원문](https://github.com/cri-o/cri-o/releases/tag/v1.37.4) · [전체 정리](https://ratatosk.io/ko/releases/cri-o/v1.37.4)

보안 3 (high 1) · 호환성 변경 1 · 중요 수정 2 · 의존성 갱신 4

## 보안 (3)

### [high] CRI-O 연결 로그 볼륨 쓰기 취약점 수정

- 영향 대상: 릴리스 노트에 언급 없음
- [CVE-2026-106096](https://www.cve.org/CVERecord?id=CVE-2026-106096), [GHSA-pw8r-75cr-c993](https://github.com/cri-o/cri-o/security/advisories/GHSA-pw8r-75cr-c993)

컨테이너가 CRI-O 또는 conmon이 로그 디렉터리 밖의 호스트 파일에 쓰도록 유도할 수 있었습니다. 이로 인해 호스트 측 무결성이 훼손될 수 있고, 대상으로 삼은 파일이 나중에 실행되면 root 명령 실행으로 이어질 가능성도 있었습니다. 수정 후에는 컨테이너에서 연결된 로그 볼륨을 읽기 전용으로 보며, kubelet의 `subPath` 바인드 별칭을 통해서도 마찬가지입니다. CRI-O는 호스트 측에서 계속 쓸 수 있습니다. 로그 수집기는 오프셋과 버퍼를 다른 곳에 보관해야 합니다.

보안 공지:

> When a container uses the opt-in `link-logs.crio.io` annotation, CRI-O exposes the pod's log directory through a pod-owned emptyDir and intends that view to be read-only. That isolation was not effective, so a container could alter host-side log state that CRI-O and conmon depend on. This gave the container a way to influence writes made by a privileged component against host files outside its own log directory, crossing the container-to-host integrity boundary; where such a file is later executed by the host, it can amount to command execution as root.
> The flaw exists since the feature's introduction in 1.28.0 and is reachable only when the annotation is enabled for the runtime handler; deployments that do not enable it are unaffected. Exploitation depends on pre-existing host state and remains subject to mandatory access control (MAC) policy, which places the attack complexity at high.
> The linked log volume is now mounted read-only in containers even when the container requests write access, including when the volume is reached through kubelet subPath bind aliases. The host-side view stays writable to CRI-O itself so that log linking and SELinux labeling keep working. Users should upgrade to one of:
> This is a behaviour change: log collectors must keep writable state such as offsets and buffers in a separate volume.
> - Do not enable `link-logs.crio.io` for any runtime handler. Deployments that leave it out of `allowed_annotations` are not reachable through a pod.
> - Run the containers of affected pods as an unprivileged UID that cannot become uid 0 (`runAsNonRoot`, no `setuid` escalation, no user-namespace mapping to host root). Kubelet creates the pod and container log directories under `/var/log/pods` as root-owned and not writable by group or other (0755), so such a container cannot create entries in the linked tree. This is conditional hardening: pods whose containers run as root, whether requested or inherited from the image, remain exposed.

https://github.com/cri-o/cri-o/security/advisories/GHSA-pw8r-75cr-c993

### Go 및 `golang.org/x/net` 자원 고갈 취약점 수정

- 영향 대상: Go 표준 라이브러리 `net/http` 또는 `crypto/tls` 코드, 아니면 `golang.org/x/net/http2` (추정)
- [CVE-2026-78667](https://www.cve.org/CVERecord?id=CVE-2026-78667), [CVE-2026-78669](https://www.cve.org/CVERecord?id=CVE-2026-78669), [CVE-2026-97031](https://www.cve.org/CVERecord?id=CVE-2026-97031)

악의적인 HTTP/2 피어가 스트림을 많이 열고 작은 SETTINGS 프레임을 보내면 CPU를 과도하게 사용하게 할 수 있었습니다. `FileServer(FS)`, `ServeContent` 또는 `ServeFile(FS)`에서 작은 범위가 많이 포함된 Range 헤더를 파싱할 때도 CPU를 과도하게 사용할 수 있었습니다. ECH 외부 확장 참조가 여러 개 포함된 클라이언트 패킷은 서버 메모리를 고갈시킬 수 있었습니다. 이번 릴리스에는 Go 1.27.2와 `golang.org/x/net` v0.60.0이 포함되며, 형식이 잘못된 여러 ECH 외부 확장 참조를 거부합니다.

> #### Dependency-Change
>  - Bumped Go to 1.27.2 and golang.org/x/net to v0.60.0, fixing CVE-2026-78669,
>   CVE-2026-78667, and CVE-2026-97031 (#10503, @amritansh1502)

### `golang.org/x/net` 취약점 수정

- 영향 대상: `golang.org/x/net`을 포함하는 CRI-O 빌드 (추정)
- [CVE-2026-78667](https://www.cve.org/CVERecord?id=CVE-2026-78667), [CVE-2026-78669](https://www.cve.org/CVERecord?id=CVE-2026-78669), [CVE-2026-97031](https://www.cve.org/CVERecord?id=CVE-2026-97031)

이 카드에서 다루는 취약점을 수정한 버전으로 v0.60.0이 기재되어 있습니다. 이전에 기재된 버전은 v0.58.0입니다.

> - golang.org/x/net: [v0.58.0 → v0.60.0](https://go.googlesource.com/net/+/acc78e0d2b2c855c0c4fbdcfe5f42a9e3d0f9778^1..18ece0ce30bc35fa81fe72028bf309bb3ff3f4a5/)

## 호환성 변경 (1)

### CRI-O 종료 교착 상태 수정

- 영향 대상: CRI-O 종료 중 CNI 준비 상태 대기

노드를 종료할 때 CNI 준비 상태를 기다리느라 진행 중인 RPC가 막히면 CRI-O가 `SIGTERM`을 무시하고 교착 상태에 빠질 수 있었습니다. 이제 이러한 대기는 컨텍스트가 취소되면 반환됩니다. CRI-O는 gRPC를 정상적으로 중지하기 전에 CNI 매니저를 종료하며, 정상 중지가 30초 넘게 걸리면 gRPC 서버를 강제 중지합니다.

>  - Fixed a deadlock where CRI-O ignored SIGTERM when in-flight RPCs were blocked waiting for CNI readiness during node shutdown. The CNI manager is now shut down before the gRPC server stops, and a forced stop is scheduled as a fallback after 30 seconds. (#10473, @openshift-cherrypick-robot)

## 중요 수정 (2)

### 제거된 인프라 컨테이너 정리 문제 수정

- 영향 대상: 제거된 인프라 컨테이너의 런타임 핸들러가 더 이상 CRI-O 설정에 없는 `RuntimeClass`를 사용하는 파드

이전에는 기록된 핸들러를 확인하지 못해 파드를 중지하거나 제거하지 못할 수 있었습니다. 이제 기본 런타임 핸들러로 폴백해 파드를 중지하고 제거할 수 있습니다.

>  - Fixed pods with a RuntimeClass and a dropped infra container running on the default runtime handler.

### 사용자 네임스페이스 OOM 점수 조정 처리 수정

- 영향 대상: 사용자 네임스페이스에서 실행되는 CRI-O 인스턴스

infra 또는 Guaranteed 파드 컨테이너가 사용자 네임스페이스의 최솟값보다 낮은 OOM 점수 조정 값을 요청하면 OCI 런타임이 컨테이너를 생성하지 못할 수 있었습니다. 이제 CRI-O는 컨테이너 생성 시 최솟값을 사용하고, 컨테이너 상태에는 `RequestedOOMScoreAdj` 어노테이션으로 요청한 값을 보고합니다.

>   Fixed creating infra and Guaranteed pod containers when CRI-O runs in a user namespace. (#10523, @openshift-cherrypick-robot)

## 의존성 갱신 (4)

그 외 4건 · 보안 언급 없음

- `- golang.org/x/crypto: [v0.55.0 → v0.57.0](https://go.googlesource.com/crypto/+/f44d03d253a1503e51b059ca880867c51d878242^1..3f62bf119e84c6e35e8518a2958089ade622d1a3/)`
- `- golang.org/x/mod: [v0.39.0 → v0.41.0](https://go.googlesource.com/mod/+/13be9020bbbfae457b59b82c999f8c309cb21ffc^1..d0a27b2d4a48460806692bf5c87fc157c3c65292/)`
- `- golang.org/x/term: [v0.45.0 → v0.46.0](https://go.googlesource.com/term/+/9f69229da31ca6a34b522f59dbe07cad5ea21587^1..6226200ed12cba417a9d9e799c2a7179d3fc0e27/)`
- `- golang.org/x/text: [v0.41.0 → v0.42.0](https://go.googlesource.com/text/+/acdba6655fd45cdb5ab73c9d6a8981333bd65a39^1..fafe4a06967e06550e69ee42787d9902845d2a3f/)`

---

정리 내용은 AI가 작성하므로 틀릴 수 있으며, 보증 없이 제공합니다.
