# CRI-O v1.35.12

2026-11-16 · [릴리스 노트 원문](https://github.com/cri-o/cri-o/releases/tag/v1.35.12) · [전체 정리](https://ratatosk.io/ko/releases/cri-o/v1.35.12)

보안 1 (high 1) · 호환성 변경 2 · 중요 수정 2 · 기타 3

## 보안 (1)

### [high] CRI-O 연결 로그 볼륨 쓰기 취약점 수정

- 영향 대상: 릴리스 노트에 언급 없음
- [CVE-2026-106096](https://www.cve.org/CVERecord?id=CVE-2026-106096), [GHSA-pw8r-75cr-c993](https://github.com/cri-o/cri-o/security/advisories/GHSA-pw8r-75cr-c993)

컨테이너가 CRI-O 또는 conmon이 로그 디렉터리 밖의 호스트 파일에 쓰도록 유도할 수 있었습니다. 이로 인해 호스트 측 무결성이 훼손될 수 있고, 대상으로 삼은 파일이 나중에 실행되면 root 명령 실행으로 이어질 가능성도 있었습니다. 수정 후에는 컨테이너에서 연결된 로그 볼륨을 읽기 전용으로 보며, kubelet의 `subPath` 바인드 별칭을 통해서도 마찬가지입니다. CRI-O는 호스트 측에서 계속 쓸 수 있습니다. 로그 수집기는 오프셋과 버퍼를 다른 곳에 보관해야 합니다.

보안 공지:

> When a container uses the opt-in `link-logs.crio.io` annotation, CRI-O exposes the pod's log directory through a pod-owned emptyDir and intends that view to be read-only. That isolation was not effective, so a container could alter host-side log state that CRI-O and conmon depend on. This gave the container a way to influence writes made by a privileged component against host files outside its own log directory, crossing the container-to-host integrity boundary; where such a file is later executed by the host, it can amount to command execution as root.
> The flaw exists since the feature's introduction in 1.28.0 and is reachable only when the annotation is enabled for the runtime handler; deployments that do not enable it are unaffected. Exploitation depends on pre-existing host state and remains subject to mandatory access control (MAC) policy, which places the attack complexity at high.
> The linked log volume is now mounted read-only in containers even when the container requests write access, including when the volume is reached through kubelet subPath bind aliases. The host-side view stays writable to CRI-O itself so that log linking and SELinux labeling keep working. Users should upgrade to one of:
> This is a behaviour change: log collectors must keep writable state such as offsets and buffers in a separate volume.
> - Do not enable `link-logs.crio.io` for any runtime handler. Deployments that leave it out of `allowed_annotations` are not reachable through a pod.
> - Run the containers of affected pods as an unprivileged UID that cannot become uid 0 (`runAsNonRoot`, no `setuid` escalation, no user-namespace mapping to host root). Kubelet creates the pod and container log directories under `/var/log/pods` as root-owned and not writable by group or other (0755), so such a container cannot create entries in the linked tree. This is conditional hardening: pods whose containers run as root, whether requested or inherited from the image, remain exposed.

https://github.com/cri-o/cri-o/security/advisories/GHSA-pw8r-75cr-c993

## 호환성 변경 (2)

### CRI-O 빌드에 필요한 최소 Go 버전 1.26.10

- 영향 대상: Go 또는 정적 빌드 컴파일러로 CRI-O를 빌드하는 환경 (추정)

이전에는 Go 모듈이 Go 1.25.0을 선언했고 Nix derivation은 Go 1.25를 사용했습니다. 이제 둘 다 Go 1.26.10을 사용합니다.

근거: “Update Go to 1.26.10 in `dependencies.yaml` and its existing references in `go.mod` and `nix/derivation.nix` so these builds use the patched toolchain.” https://github.com/cri-o/cri-o/pull/10493

>  - CRI-O's minimum Go version and static-build compiler are now Go 1.26.10. (#10493, @bitoku)

### CRI-O 종료 데드락 수정

- 영향 대상: CNI 플러그인 준비 상태 확인을 사용하는 CRI-O 구성 (추정)

노드를 종료할 때 CNI 준비 상태를 기다리는 진행 중인 RPC가 CRI-O에서 데드락을 일으켜 SIGTERM을 무시하게 만들 수 있었습니다. 이제 종료 시 CNI 매니저를 먼저 중지한 뒤 gRPC를 정상적으로 종료합니다. 30초가 지나도 정상 종료가 완료되지 않으면 gRPC를 강제 종료하며, CNI 준비 상태 대기가 컨텍스트 취소로 중단되면 오류를 반환합니다.

>  - Fixed a deadlock where CRI-O ignored SIGTERM when in-flight RPCs were blocked waiting for CNI readiness during node shutdown. The CNI manager is now shut down before the gRPC server stops, and a forced stop is scheduled as a fallback after 30 seconds. (#10545, @nispriha)

## 중요 수정 (2)

### 활성 exec 프로세스가 있는 컨테이너 중지 시 충돌 수정

- 영향 대상: 활성 exec 프로세스가 있는 컨테이너

CRI-O는 컨테이너를 중지할 때 exec 프로세스 PID 맵을 사용하기 전에 해당 맵을 복제합니다.

>  - Fixed a possible CRI-O crash when stopping containers with active exec processes. (#10529, @openshift-cherrypick-robot)

### CRI-O, systemd/init 컨테이너의 기본 SELinux 레이블링 복원

- 영향 대상: systemd/init 컨테이너를 실행하는 SELinux 활성화 환경

스토리지 기본 레이블인 `container_t`를 사용하면 SELinux가 활성화된 노드의 systemd 파드에서 권한 거부로 cgroup 생성에 실패할 수 있었습니다. 컨테이너나 샌드박스에 `seLinuxOptions.type`을 명시적으로 설정한 경우에는 해당 설정이 계속 우선 적용됩니다.

>  - Fix SELinux labeling so systemd/init containers receive container_init_t again instead of remaining container_t and failing to create cgroups. (#10509, @aksjadha)

## 기타 (3)

- 추적 대상 `golangci-lint` 버전을 v2.10.1로 업데이트
- s390x Nix 빌드에서 `zlib` 벡터화 CRC32 비활성화
- `ContainerMinMemory` 폴백 오류에서 %d 사용

---

정리 내용은 AI가 작성하므로 틀릴 수 있으며, 보증 없이 제공합니다.
