# CRI-O v1.35.12

2026-11-16 · [元のリリースノート](https://github.com/cri-o/cri-o/releases/tag/v1.35.12) · [全体のまとめ](https://ratatosk.io/ja/releases/cri-o/v1.35.12)

セキュリティ 1 (high 1) · 破壊的変更 2 · 重大な修正 2 · その他の変更 3

## セキュリティ (1)

### [high] リンクされたログボリュームへの書き込み脆弱性の修正

- 影響対象: リリースノートに記載なし
- [CVE-2026-106096](https://www.cve.org/CVERecord?id=CVE-2026-106096), [GHSA-pw8r-75cr-c993](https://github.com/cri-o/cri-o/security/advisories/GHSA-pw8r-75cr-c993)

コンテナから CRI-O または conmon にログディレクトリー外のホストファイルを書き込ませることができ、ホスト側の整合性が損なわれるほか、対象ファイルが後で実行された場合には root 権限でコマンドを実行される可能性がありました。修正後、kubelet の `subPath` による bind エイリアス経由も含め、コンテナからリンクされたログボリュームは読み取り専用として見えます。一方、CRI-O はホスト側から引き続き書き込めます。ログ収集ツールはオフセットとバッファーを別の場所に保持する必要があります。

セキュリティアドバイザリ:

> When a container uses the opt-in `link-logs.crio.io` annotation, CRI-O exposes the pod's log directory through a pod-owned emptyDir and intends that view to be read-only. That isolation was not effective, so a container could alter host-side log state that CRI-O and conmon depend on. This gave the container a way to influence writes made by a privileged component against host files outside its own log directory, crossing the container-to-host integrity boundary; where such a file is later executed by the host, it can amount to command execution as root.
> The flaw exists since the feature's introduction in 1.28.0 and is reachable only when the annotation is enabled for the runtime handler; deployments that do not enable it are unaffected. Exploitation depends on pre-existing host state and remains subject to mandatory access control (MAC) policy, which places the attack complexity at high.
> The linked log volume is now mounted read-only in containers even when the container requests write access, including when the volume is reached through kubelet subPath bind aliases. The host-side view stays writable to CRI-O itself so that log linking and SELinux labeling keep working. Users should upgrade to one of:
> This is a behaviour change: log collectors must keep writable state such as offsets and buffers in a separate volume.
> - Do not enable `link-logs.crio.io` for any runtime handler. Deployments that leave it out of `allowed_annotations` are not reachable through a pod.
> - Run the containers of affected pods as an unprivileged UID that cannot become uid 0 (`runAsNonRoot`, no `setuid` escalation, no user-namespace mapping to host root). Kubelet creates the pod and container log directories under `/var/log/pods` as root-owned and not writable by group or other (0755), so such a container cannot create entries in the linked tree. This is conditional hardening: pods whose containers run as root, whether requested or inherited from the image, remain exposed.

https://github.com/cri-o/cri-o/security/advisories/GHSA-pw8r-75cr-c993

## 破壊的変更 (2)

### CRI-O のビルドに必要な Go の最低バージョンを 1.26.10 に引き上げ

- 影響対象: Go または静的ビルド用コンパイラーを使って CRI-O をビルドする環境 (推定)

これまで Go モジュールでは Go 1.25.0 を宣言し、Nix の導出定義では Go 1.25 を使用していました。現在はどちらも Go 1.26.10 を使用します。

根拠: “Update Go to 1.26.10 in `dependencies.yaml` and its existing references in `go.mod` and `nix/derivation.nix` so these builds use the patched toolchain.” https://github.com/cri-o/cri-o/pull/10493

>  - CRI-O's minimum Go version and static-build compiler are now Go 1.26.10. (#10493, @bitoku)

### CRI-O のシャットダウン時のデッドロックを修正

- 影響対象: CNI プラグインの準備完了チェックを行う CRI-O 環境 (推定)

ノードのシャットダウン中、CNI の準備完了を待つ処理中の RPC がデッドロックを引き起こし、CRI-O が SIGTERM を無視することがありました。シャットダウン時は、まず CNI マネージャーを停止してから gRPC を正常に停止します。30 秒経過しても正常な停止が完了しない場合は、gRPC を強制停止します。また、CNI の準備完了待ちがコンテキストによってキャンセルされた場合は、エラーを返します。

>  - Fixed a deadlock where CRI-O ignored SIGTERM when in-flight RPCs were blocked waiting for CNI readiness during node shutdown. The CNI manager is now shut down before the gRPC server stops, and a forced stop is scheduled as a fallback after 30 seconds. (#10545, @nispriha)

## 重大な修正 (2)

### 実行中の exec プロセスがあるコンテナの停止時クラッシュの修正

- 影響対象: 実行中の exec プロセスがあるコンテナ

コンテナの停止時に exec プロセスの PID マップを使用する前に、CRI-O はその複製を作成するようになりました。

>  - Fixed a possible CRI-O crash when stopping containers with active exec processes. (#10529, @openshift-cherrypick-robot)

### systemd/init コンテナの SELinux ラベル既定値の復元

- 影響対象: SELinux を有効にした環境で systemd/init コンテナを実行している構成

ストレージの既定値である `container_t` ラベルを使用すると、SELinux が有効なノード上の systemd Pod で、権限拒否により cgroup を作成できないことがありました。コンテナまたはサンドボックスに明示的に設定された `seLinuxOptions.type` は、引き続き優先されます。

>  - Fix SELinux labeling so systemd/init containers receive container_init_t again instead of remaining container_t and failing to create cgroups. (#10509, @aksjadha)

## その他の変更 (3)

- `golangci-lint` の追跡バージョンを v2.10.1 に更新
- s390x の Nix ビルドで `zlib` のベクトル化 CRC32 を無効化
- `ContainerMinMemory` のフォールバックエラーで `%d` を使用

---

整理した内容は AI が作成するため誤っている可能性があり、無保証で提供されます。
