RATATOSK
← 전체 릴리스

Mesheryv1.0.14

호환성 변경 7폐기 예정 1중요 수정 2의존성 갱신 5기타 23

Meshery 알림 받기

확인할 변경이 있을 때만 주 1회, critical 보안 공지는 즉시 발송

호환성 변경7

이벤트 소비자의 표준 camelCase JSON 키 전환

영향 대상Meshery UI의 Event 및 Notification Center 소비자와 Event 또는 EventsFilter JSON 필드나 actedUpon 쿼리 매개변수를 사용하는 클라이언트

meshkit이 v1.0.6이던 당시에는 소비자가 event.created_at, event.user_id, event.system_id 같은 필드와 snake_case 이벤트 요약 키를 읽었습니다. 이제는 표준 camelCase 필드와 요약 키를 읽으며, getEventFilter는 레거시 acted_upon 쿼리 매개변수도 폴백으로 받습니다.

근거“`ui/rtk-query/notificationCenter.ts` - `getEventsSummary` `transformResponse` reads canonical summary keys (`countBySeverityLevel`, `totalCount`, `readCount`); leaves the `sort` URL param as `created_at` because it is the GORM column name, not a JSON field, and is whitelisted by `SanitizeOrderInput` (annotated with a comment to that effect)” meshery/meshery/pull/18987 ↗
원문 보기
- chore(deps): bump meshkit v1.0.6 -> v1.0.7 + flip Event consumer reads @leecalcote (#18987)
github.com/meshery/meshery/releases/tag/v1.0.14

Meshery Server 오류 응답의 구조화된 JSON 사용

영향 대상Meshery Server 핸들러 및 프로바이더의 오류 응답을 사용하는 클라이언트
필요 조치schemas 측 변경은 필요하지 않음

이전에는 일부 오류 경로가 일반 텍스트를 반환해 UI의 RTK Query 파서가 중단됐습니다. 클라이언트 페이로드의 언마샬링 실패로 500 오류가 반환될 수 있었고, 스트리밍이 시작된 뒤 발생한 오류는 상태 코드를 바꾸지 않은 채 다운로드 내용을 손상시킬 수 있었습니다. 해당 상태 코드를 바로잡았으며, 스트리밍 시작 후 발생한 오류는 다운로드 본문에 덧붙이는 대신 로그에 기록합니다.

근거“Migrates Meshery Server from plain-text HTTP error responses to structured JSON envelopes carrying full MeshKit error metadata (`code`, `severity`, `probable_cause`, `suggested_remediation`, `long_description`). Resolves the `SyntaxError: Unexpected token 'S', "Status Cod"... is not valid JSON` crash in the UI's RTK Query baseQuery and gives every Meshery client (UI, `mesheryctl`, Kanvas, Meshery Cloud) a stable, structured error contract.” meshery/meshery/pull/18919 ↗
원문 보기
- fix(server): JSON error responses across handlers + provider layer @jamieplu (#18919)
- fix(server): JSON error responses across handlers + provider layer @jamieplu (#18919)
- fix(server): JSON error responses across handlers + provider layer @jamieplu (#18919)
- fix(server): JSON error responses across handlers + provider layer @jamieplu (#18919)
github.com/meshery/meshery/releases/tag/v1.0.14

영향받는 서버 경로의 타입 지정 MeshKit 오류

영향 대상디자인 가져오기, 패턴 변환, 아티팩트 압축, 레지스트리 로그 플러시, 엔티티 상태 업데이트, 확장 프록시 처리 및 연결 상태 머신 작업을 위한 Meshery 서버 경로

이전에는 이러한 실패가 {error: <cstdlib msg>}만 반환했습니다. 디자인 가져오기에서 발생하는 oneOf 불변 조건 오류도 다른 4xx 응답과 형태가 달랐습니다. 이제 이러한 실패가 발생하면 응답에 code, severity, probable_cause, suggested_remediation이 포함됩니다. 디자인 가져오기 불변 조건 오류에는 ErrInvalidImportRequest를 사용하며, 응답 형태도 다른 4xx 응답과 일치합니다.

근거“Wrap bare-string `errors.New` returns in `resolveImportVariant` (design import oneOf invariant violations) with `ErrInvalidImportRequest`, so that arm of the design-import endpoint's 400 responses no longer differs in shape from its other 4xx responses.” meshery/meshery/pull/18955 ↗
원문 보기
- fix(server): promote raw-err passthroughs to MeshKit codes (follow-up to #18919) @leecalcote (#18955)
github.com/meshery/meshery/releases/tag/v1.0.14

Meshmodel 등록 시 로그 쓰기 실패를 HTTP 500으로 보고

영향 대상RegisterMeshmodelComponents를 사용하는 서버 구성

등록 중 WriteLogsToFiles가 실패하면 내부 flush 실패는 이전에 HTTP 400을 반환했고 클라이언트 오류로 분류됐습니다.

근거“`component_handler.go::RegisterMeshmodelComponents` — `WriteLogsToFiles` failure was returning 400; now 500. The flush is internal-only and not driven by caller input, so 4xx mis-classifies the failure as a client error.” meshery/meshery/pull/18955 ↗
원문 보기
- fix(server): promote raw-err passthroughs to MeshKit codes (follow-up to #18919) @leecalcote (#18955)
github.com/meshery/meshery/releases/tag/v1.0.14

Extension 프록시 실패 시 HTTP 502 반환

영향 대상ExtensionsHandler와 provider.ExtensionProxy를 사용하는 서버 설정

원격 provider에서 네트워크, DNS, TLS 오류가 발생하거나 2xx가 아닌 응답을 받으면, 이전에는 ExtensionsHandler가 HTTP 500을 반환했습니다.

근거“`extensions.go::ExtensionsHandler` — failure of `provider.ExtensionProxy` was returning 500; now 502. The failure is in the upstream remote provider (network, DNS, TLS, non-2xx response), not in this Meshery server, so 502 Bad Gateway is the correct passthrough status.” meshery/meshery/pull/18955 ↗
원문 보기
- fix(server): promote raw-err passthroughs to MeshKit codes (follow-up to #18919) @leecalcote (#18955)
github.com/meshery/meshery/releases/tag/v1.0.14

Kubernetes 연결 인터페이스의 표준 camelCase 전환

영향 대상Kubernetes 연결 메타데이터, GetK8sContexts 쿼리 매개변수 또는 K8sContext GraphQL 및 UI 필드

이전에는 메타데이터 키와 쿼리 매개변수, 생성된 GraphQL 및 UI 필드가 snake_case를 사용했습니다. Meshery Cloud는 표준 형식과 snake_case 메타데이터 키를 모두 허용하며, 표준 형식의 키를 우선 적용합니다.

근거“After this change, the canonical wire form is camelCase across struct, metadata blob, URL query, and graphql codegen, fully aligned with the canonical identifier-naming contract in `meshery/schemas`.” meshery/meshery/pull/18986 ↗
원문 보기
- fix(wire-format): flip Kubernetes connection metadata literal keys to canonical camelCase (Phase 5b) @leecalcote (#18986)
- fix(wire-format): flip Kubernetes connection metadata literal keys to canonical camelCase (Phase 5b) @leecalcote (#18986)
github.com/meshery/meshery/releases/tag/v1.0.14

MeshSync 핸들러 오류에 표준 래퍼 적용

영향 대상서버의 MeshSync 이벤트 및 스토어 업데이트 핸들러(추정)

이 핸들러들은 이전에는 원시 오류를 로그로 남겼습니다. 이제 ErrMeshsyncEvent와 ErrMeshsyncStoreUpdates를 사용하며, meshery-server-1379와 meshery-server-1380 코드를 비롯해 추정 원인과 권장 해결 방법 정보를 제공합니다.

근거“Currently, the `MeshsyncDataHandler` in `server/models/meshsync_events.go` logs raw errors instead of using Meshery's standardized error code system defined in `server/models/error.go`.” meshery/meshery/pull/18236 ↗
원문 보기
- [Server] Implement Proper Error Codes for MeshSync Data Handler @workwithsarang (#18236)
github.com/meshery/meshery/releases/tag/v1.0.14

폐기 예정1

레거시 local-mirror JSON 필드와 shim 지원 중단 예정

영향 대상User, Role, Connection, Workspace, Event, MesheryPattern, MesheryResults, Mappings, Capabilities, Collaboration, Academy, MeshModels를 사용하는 Meshery 서버의 local-mirror 타입 및 UI 소비자
제거 시점Phase 6

Meshery Cloud가 표준 camelCase 필드를 내보낼 때, 이전 local-mirror 타입은 Go의 JSON 매칭이 밑줄 경계를 넘지 못해 해당 필드를 조용히 누락했습니다. 업데이트된 타입은 이제 해당 필드를 디코딩합니다. 마이그레이션하지 않은 다운스트림 소비자를 위해 지원 중단 기간에는 레거시 필드와 MarshalJSON/UnmarshalJSON shim도 유지됩니다.

원문 보기
- fix(wire-format): flip meshery server + UI to canonical camelCase (Phase 5) @leecalcote (#18974)
- fix(wire-format): flip meshery server + UI to canonical camelCase (Phase 5) @leecalcote (#18974)
- fix(wire-format): flip meshery server + UI to canonical camelCase (Phase 5) @leecalcote (#18974)
github.com/meshery/meshery/releases/tag/v1.0.14

중요 수정2드러나지 않던 결함1

  • 로드 테스트 SSE 마샬링 오류의 스트림 내 처리드러나지 않던 결함
    영향 대상서버의 SSE 핸들러를 사용하는 로드 테스트

    진행 중인 SSE 응답에서 로드 테스트 결과를 JSON으로 마샬링하는 데 실패하면, 헤더가 플러시된 뒤 http.Error가 SSE 프레이밍을 손상시킬 수 있었고 응답 채널 버퍼가 가득 차면 워커가 차단된 상태로 남을 수 있었습니다. 이제 핸들러는 LoadTestResponse 오류 이벤트를 내보내고 채널이 닫힐 때까지 채널을 비웁니다.

    - ci(server): flip forbidigo http.Error guard to blocking @leecalcote (#18927)
    github.com/meshery/meshery/releases/tag/v1.0.14
  • MeshSync 핸들러의 예상치 못한 객체 유형 확인
    영향 대상서버 MeshSync 이벤트 및 스토어 업데이트 핸들러

    이전에는 오류 이벤트에 오류가 아닌 객체가 있거나 스토어 업데이트 객체가 []interface{} 유형이 아니면, 타입 어설션을 검사 없이 수행해 패닉이 발생할 수 있었습니다. 이제 이런 객체는 해당 오류 래퍼를 통해 로그에 기록한 뒤 건너뛰므로 핸들러가 처리를 계속할 수 있습니다.

    - [Server] Implement Proper Error Codes for MeshSync Data Handler @workwithsarang (#18236)
    github.com/meshery/meshery/releases/tag/v1.0.14

의존성 갱신5

    그 외 5건 · 보안 언급 없음
    • - chore(deps): bump meshkit v1.0.6 -> v1.0.7 + flip Event consumer reads @leecalcote (#18987)
    • - chore(deps): Bump github.com/olekukonko/tablewriter from 1.1.0 to 1.1.4 @[dependabot[bot]](https://github.com/apps/dependabot) (#16824)
    • - Bump github.com/open-policy-agent/opa from 1.11.0 to 1.12.1 @[dependabot[bot]](https://github.com/apps/dependabot) (#16825)
    • - Bump github.com/envoyproxy/go-control-plane/envoy from 1.35.0 to 1.36.0 @[dependabot[bot]](https://github.com/apps/dependabot) (#16826)
    • - Bump postcss from 8.5.6 to 8.5.12 in /docs @[dependabot[bot]](https://github.com/apps/dependabot) (#18947)
    기타23

    정리 내용은 AI가 작성하므로 틀릴 수 있으며, 보증 없이 제공합니다.