호환성 변경38
VM 스냅샷 및 내보내기에서 메모리 덤프 PVC 제외
영향 대상메모리 덤프 PVC가 연결된 VM 스냅샷 또는 내보내기(추정)
스냅샷이나 내보내기를 복원해도 이 변경 전부터 덤프 PVC는 복원되지 않았습니다.
근거“Snapshots and exports no longer include the dump PVC (restore never restored it anyway).” kubevirt/kubevirt/pull/19550 ↗ 원문 보기
- [PR #19550][Acedus] Memory dumps are attached as utility volumes and require the UtilityVolumes feature gate, which is promoted to Beta and enabled by default. VM snapshots and exports no longer include the memory dump PVC.
github.com/kubevirt/kubevirt/releases/tag/v1.10.0VirtualMachineBackup 유형 보고를 볼륨별 상태로 전환
영향 대상기준 체크포인트 비트맵이 없는 디스크가 포함된 체크포인트 기반 VirtualMachineBackup
이전에는 디스크 하나에 기준 체크포인트 비트맵이 없으면 유효한 비트맵이 있는 디스크까지 포함해 백업 전체가 실패했습니다. 이제 해당 디스크는 전체 백업되고, 나머지 디스크는 증분 델타를 유지합니다.
원문 보기
- [PR #19056][Acedus] VirtualMachineBackup no longer fails when a disk has lost the base checkpoint's bitmap; that disk is backed up in full and type is now reported per volume in `status.includedVolumes[].type`, replacing the removed `status.type`.
github.com/kubevirt/kubevirt/releases/tag/v1.10.0VirtualMachineBackup에서 볼륨별 백업 유형 보고
영향 대상VirtualMachineBackup 상태를 읽는 클라이언트 또는 자동화(추정)
이전에는 체크포인트 기반 백업에서 디스크가 기준 체크포인트의 비트맵을 잃으면 전체 백업이 실패했습니다. 이제 해당 디스크는 전체 백업으로 처리됩니다.
원문 보기
- [PR #19056][Acedus] VirtualMachineBackup no longer fails when a disk has lost the base checkpoint's bitmap; that disk is backed up in full and type is now reported per volume in `status.includedVolumes[].type`, replacing the removed `status.type`.
github.com/kubevirt/kubevirt/releases/tag/v1.10.0io.kubevirt.disk.name 어노테이션에 VM 볼륨 이름 사용
영향 대상디스크 레이어가 포함된 내보낸 OCI 아티팩트(추정)
이전에는 어노테이션에 VM spec의 볼륨 이름이 아니라 PVC에서 유래한 정제된 마운트 디렉터리 이름이 들어가 VM 볼륨을 식별하지 못했습니다. 예를 들어 fedora-vm-rootdisk를 기반으로 하는 rootdisk 볼륨은 이제 rootdisk로 표시됩니다.
근거“The volume name is passed to the exporter pod and the layer is annotated with it. A volume `rootdisk` backed by claim `fedora-vm-rootdisk` is annotated `rootdisk`.” kubevirt/kubevirt/pull/19066 ↗ 원문 보기
- [PR #19066][0xFelix] The io.kubevirt.disk.name annotation of exported OCI artifacts now carries the volume name from the VM instead of the PersistentVolumeClaim name
github.com/kubevirt/kubevirt/releases/tag/v1.10.0사용자 정의 HostDisk 볼륨을 CBT 대상에서 제외
영향 대상사용자 정의 HostDisk 볼륨을 사용하는 CBT
누락된 DiskOrCreate 이미지가 별도 알림 없이 다시 생성되면, 해당 CBT 오버레이가 더 이상 존재하지 않는 디스크를 계속 나타낼 수 있었습니다. 이제 HostDisk 볼륨은 CBT 메모리 오버헤드에 포함되지 않습니다.
근거“Only PVC and DataVolume volumes are eligible for CBT. User-defined HostDisk volumes are no longer tracked, and no longer count towards CBT's memory overhead.” kubevirt/kubevirt/pull/19410 ↗ 원문 보기
- [PR #19410][Acedus] HostDisk volumes are no longer eligible for changed block tracking.
github.com/kubevirt/kubevirt/releases/tag/v1.10.0virt-launcher-monitor의 VIRT_LAUNCHER_LOG_VERBOSITY 설정 미적용
영향 대상virt-launcher-monitor에 VIRT_LAUNCHER_LOG_VERBOSITY를 설정하는 구성(추정)
이전에는 유효한 정수 값을 설정하면 Go 모니터의 로그 verbosity가 지정됐습니다. 새로 작성된 C 모니터는 설정된 값을 verbosity 지정에 사용하지 않습니다.
근거“- no `VIRT_LAUNCHER_LOG_VERBOSITY` in the monitor” kubevirt/kubevirt/pull/19240 ↗ 원문 보기
- [PR #19240][vladikr] virt-launcher-monitor is rewritten in C to reduce memory footprint to about 2Mi
github.com/kubevirt/kubevirt/releases/tag/v1.10.0영구 예약 LUN의 기본 SCSI 버스 설정과 비 SCSI 버스 거부
근거“Default bus to SCSI when reservation is true and bus is unset, and reject with a validation error when reservation is true with an explicitly non-SCSI bus.” kubevirt/kubevirt/pull/18267 ↗ 원문 보기
- [PR #18267][akalenyu] Default LUN bus to SCSI when persistent reservation is enabled
github.com/kubevirt/kubevirt/releases/tag/v1.10.0명시적 정책이 필요한 소프트웨어 에뮬레이션
영향 대상소프트웨어 에뮬레이션을 사용하거나 VM에 에뮬레이션 정책을 사용하는 KubeVirt 클러스터
이전에는 소프트웨어 에뮬레이션을 클러스터 전체의 켜기 또는 끄기 설정으로 제어했습니다. 이제는 에뮬레이션 정책에서 선택한 경우에만 사용됩니다. KubeVirt CR에서 spec.configuration.emulationPolicy: Software를 설정하면 기존 동작이 유지됩니다.
근거“Action Required: Add `spec.configuration.emulationPolicy: Software` to kubevirt CR to keep existing behaviour if using Software Emulation” kubevirt/kubevirt/pull/19244 ↗ 원문 보기
- [PR #19244][jschintag] Add configuration option for cluster wide and per VM emulation (Alpha Stage).
github.com/kubevirt/kubevirt/releases/tag/v1.10.0virt-launcher-monitor의 Istio 프록시 종료 기능 제거
영향 대상Istio 사이드카를 사용하는 KubeVirt 구성
필요 조치Istio 1.27 이상 또는 네이티브 사이드카 모드
레거시 Istio 인젝션에서는 Envoy가 일반 컨테이너로 실행되어 메인 컨테이너가 종료된 뒤에도 Pod가 계속 실행될 수 있었습니다. 종료 과정에서 virt-launcher-monitor는 더 이상 프록시를 종료하지 않습니다.
원문 보기
- [PR #19239][akalenyu] Istio sidecar proxy termination is no longer handled by virt-launcher-monitor; Istio >= 1.27 is required with kubevirt (alternatively, use native sidecar mode)
github.com/kubevirt/kubevirt/releases/tag/v1.10.0VirtualMachineBackup 상태의 pull 모드 엔드포인트 링크 분리
영향 대상pull 모드 백업의 VirtualMachineBackup 상태
pull 모드 VirtualMachineExport에 내부 링크와 외부 링크가 모두 있을 때, 백업 상태에는 이전에 한 세트만 노출되어 다른 세트가 누락됐습니다. 기존 EndpointCert, DataEndpoint, MapEndpoint 필드는 제거됐으며, 새 링크 항목마다 자체 CA 인증서와 볼륨별 데이터 URL 및 맵 URL이 포함됩니다.
근거“The existing fields (`EndpointCert`, `DataEndpoint`, `MapEndpoint`) are removed. Consumers of pull-mode backups should use `status.links.internal` and/or `status.links.external` instead.” kubevirt/kubevirt/pull/18537 ↗ 원문 보기
- [PR #18537][davmarro] Add structured `links` field to `VirtualMachineBackup` status exposing both internal and external export endpoints for pull-mode backups. The existing endpoint fields are removed.
github.com/kubevirt/kubevirt/releases/tag/v1.10.0베타 단계로 승격되고 기본 활성화된 VSOCK 기능 게이트
영향 대상VSOCK 기능 게이트를 사용하거나 설정하는 설치 환경 및 VSOCK을 사용하는 워크로드(추정)
원문 보기
- [PR #19155][0xFelix] The VSOCK feature gate graduated to Beta and is now enabled by default.
github.com/kubevirt/kubevirt/releases/tag/v1.10.0KubeVirt의 레거시 cpumanager 노드 레이블 사용 중단
영향 대상virt-handler가 업데이트한 노드에서 레거시 cpumanager 노드 레이블을 사용하는 자동화 또는 스케줄링 규칙(추정)
kubevirt.io/cpumanager 레이블은 Pod에서 계속 사용됩니다.
원문 보기
- [PR #19100][xpivarc] Label "cpumanager" is no longer used
github.com/kubevirt/kubevirt/releases/tag/v1.10.0VM 메모리 계산에 CBT dirty bitmap 오버헤드 포함
기존에는 메모리 계산에서 CBT dirty bitmap에 필요한 메모리를 제외해 필요량을 실제보다 적게 산정했습니다. 이제 계산에는 포함된 각 디스크의 오버헤드가 반영되며, CBT 대상 볼륨과 활성 백업 추적기, 동적 증가에 대비한 버퍼도 고려합니다.
원문 보기
- [PR #18416][Acedus] VMs with CBT now correctly factor in the required memory overhead for each of their included disks.
github.com/kubevirt/kubevirt/releases/tag/v1.10.0사용자 정의 seccomp 프로파일 설치에 게이트 미적용
영향 대상KubevirtSeccompProfile 게이트를 사용하거나 KubeVirt의 사용자 정의 seccomp 프로파일에 의존하는 클러스터
이전 릴리스에서는 KubevirtSeccompProfile을 명시적으로 활성화한 경우에만 KubeVirt가 프로파일을 설치했습니다. 이제는 게이트가 비활성화되어 있어도 프로파일을 설치합니다.
근거“**Before:** The `KubevirtSeccompProfile` feature gate is at Beta. The custom seccomp profile is only installed when the feature gate is explicitly enabled, and operator tests verify configuration statically (file presence, pod annotation). **After:** The `KubevirtSeccompProfile` feature gate graduates to GA. The custom seccomp profile is always installed, the feature gate check is removed, and three hardening improvements are included:” kubevirt/kubevirt/pull/18888 ↗ 원문 보기
- [PR #18888][dankenigsberg] Graduate the KubevirtSeccompProfile feature gate to GA. The custom seccomp profile is now always installed. Tighten profile file permissions to 0600, and write it atomically.
github.com/kubevirt/kubevirt/releases/tag/v1.10.0Network Resources Injector를 통한 네트워크 리소스 주입 상시 활성화
영향 대상NetworkAttachmentDefinition 기반 인터페이스에 네트워크 리소스 주입을 사용하는 설치 환경
ExternalNetResourceInjection 기능 게이트는 v1.9부터 기본적으로 활성화되어 있었지만, 이를 비활성화한 설치 환경도 더 이상 옵트아웃할 수 없습니다. virt-controller는 더 이상 NetworkAttachmentDefinition 오브젝트를 조회하거나 런처 Pod에 네트워크 리소스 요청을 주입하지 않으며, ClusterRole도 k8s.cni.cncf.io network-attachment-definitions에 대한 get 권한을 더 이상 부여하지 않습니다.
근거“The `ExternalNetResourceInjection` FG has been Beta since v1.8.0 and enabled by default since v1.9. It disables virt-controller's query of `NetworkAttachmentDefinition` objects and the deployment of NAD RBAC rules by virt-operator. This PR graduates it to GA, making this behavior always on. virt-controller no longer queries `NetworkAttachmentDefinition` objects, injects network resource requests into the launcher pod, or holds the `k8s.cni.cncf.io network-attachment-definitions` get permission.” kubevirt/kubevirt/pull/18497 ↗ 원문 보기
- [PR #18497][orelmisan] ExternalNetResourceInjection graduated to GA. virt-controller no longer queries NetworkAttachmentDefinition objects or injects network resource requests into the launcher pod. The k8s.cni.cncf.io network-attachment-definitions get rule is
github.com/kubevirt/kubevirt/releases/tag/v1.10.0VM 마이그레이션에서 해시된 인터페이스 이름 사용
영향 대상ordinal 네트워크 또는 tap 인터페이스 이름을 사용하는 VM, --upgrade-ordinal-ifaces를 사용하는 자동화
필요 조치라이브 마이그레이션 중 해당 VM 자동 변환, 수동 개입 불필요
이전에는 마이그레이션 대상이 소스 Pod의 ordinal 인터페이스 이름을 그대로 유지할 수 있었고, 사전 마이그레이션 훅은 게이트로 제어됐습니다. 이제 --upgrade-ordinal-ifaces 플래그를 사용할 수 없습니다.
근거“Migration targets will no longer preserve ordinal pod interface names from the source pod - the hashed scheme is always used. The pre-migration hook that converts ordinal tap names to hashed equivalents now runs unconditionally” kubevirt/kubevirt/pull/18317 ↗ 원문 보기
- [PR #18317][orelmisan] Graduate the PodSecondaryInterfaceNamingUpgrade feature gate to GA. The pre-migration hook that converts ordinal network interface names to hashed equivalents now runs unconditionally.
github.com/kubevirt/kubevirt/releases/tag/v1.10.0VMI 메모리 요청의 QEMU 오버헤드 추정치 증가
영향 대상KVM 또는 MSHV 하이퍼바이저 백엔드를 사용하는 VMI pod
QEMU 프로세스 오버헤드 추정치가 30Mi에서 50Mi로 늘어나 VMI pod 메모리 요청이 각각 20Mi씩 증가합니다.
원문 보기
- [PR #18388][dasionov] Bumped QEMU process memory overhead from 30Mi to 50Mi, increasing VMI pod memory requests by 20Mi to reflect actual QEMU RSS requirements with current QEMU versions.
github.com/kubevirt/kubevirt/releases/tag/v1.10.0Node 훅의 플러그인 수준 조건 반영
영향 대상플러그인 수준에서 Spec.Condition을 설정한 Node 훅(추정)
이를 통해 Node 훅의 조건 처리 방식이 도메인 훅과 일치합니다.
원문 보기
- [PR #18414][iholder101] Fix CallNodeHooks to evaluate plugin-level Spec.Condition, ensuring consistent behavior between domain hooks and node hooks.
github.com/kubevirt/kubevirt/releases/tag/v1.10.0kubevirt.io/client-go/log의 전역 -v 등록 제거
영향 대상kubevirt.io/client-go/log 패키지를 임포트하는 코드
kubevirt.io/client-go/log 패키지를 임포트할 때 glog나 klog 같은 다른 패키지가 이미 flag.CommandLine에 -v를 등록한 상태면 패닉이 발생했습니다. 이제 이 플래그는 패키지 전용 FlagSet에 보관되므로 flag.CommandLine.Lookup("v")로는 더 이상 찾을 수 없습니다. 대신 log.VerbosityFlag()로 가져올 수 있습니다.
근거“The `-v` flag is registered on a package-private `FlagSet` instead of the global `flag.CommandLine`. A new `VerbosityFlag()` function is exported so that consumers can bridge it into pflag without going through `flag.CommandLine`. All 8 internal call sites are updated. Importing `kubevirt.io/client-go/log` no longer registers any flags on the global `flag.CommandLine`, eliminating the conflict entirely regardless of `init()` ordering.” kubevirt/kubevirt/pull/18294 ↗ 원문 보기
- [PR #18294][guzalv] client-go/log: The `-v` verbosity flag is no longer registered on `flag.CommandLine` during `init()`. External consumers that used `flag.CommandLine.Lookup("v")` to obtain the verbosity flag must switch to `log.VerbosityFlag()`. This eliminates panics when importing `kubevirt.io/client-go` alongside packages that also register a `-v` flag (e.g. glog, klog).github.com/kubevirt/kubevirt/releases/tag/v1.10.0메모리 덤프에서 VMI 유틸리티 볼륨 사용
이전에는 덤프를 수행하면 VM 템플릿과 vmi.spec.volumes 모두에 MemoryDump 볼륨이 추가됐습니다. 이제 템플릿은 변경하지 않고 PVC를 VMI에 연결합니다. 덤프가 진행되는 동안 VMI가 중지되거나 재시작되면 새 VMI에서 계속 진행하는 대신 덤프가 실패합니다. 업그레이드 중 이미 진행 중이던 덤프는 완료된 뒤 분리됩니다.
근거“A memory dump request attaches its PVC to the VMI as a utility volume of type `MemoryDump`, nothing is written to the VM template. A dump still in progress when its VMI stops or restarts fails instead of dumping the new VMI. Dumps that were in progress on it during the upgrade finish, then it's detached.” kubevirt/kubevirt/pull/19550 ↗ 원문 보기
- [PR #19550][Acedus] Memory dumps are attached as utility volumes and require the UtilityVolumes feature gate, which is promoted to Beta and enabled by default. VM snapshots and exports no longer include the memory dump PVC.
github.com/kubevirt/kubevirt/releases/tag/v1.10.0mdev 기반 vGPU 라이브 마이그레이션용 VGPULiveMigration을 MDevVGPULiveMigration으로 이름 변경
영향 대상mdev 기반 vGPU 라이브 마이그레이션의 Alpha 기능 게이트를 활성화한 설정
근거“Mdev-based vGPU live migration uses `MDevVGPULiveMigration`.” kubevirt/kubevirt/pull/19546 ↗ 원문 보기
- [PR #19546][dasionov] Renamed the alpha feature gate for mdev-based vGPU live migration from VGPULiveMigration to MDevVGPULiveMigration.
github.com/kubevirt/kubevirt/releases/tag/v1.10.0런처 훅 조건에서 domainSpec 제거
영향 대상domainSpec을 참조하는 런처 훅 condition 표현식(추정)
이전에는 훅 조건에서 VMI와 domainSpec을 모두 참조할 수 있었습니다. 조건부 도메인 변경에는 여전히 CEL의 has() 연산자를 사용할 수 있습니다.
근거“In addition, Launcher hook `condition` expressions could also reference `domainSpec` in addition to the VMI, which both complicated the code and was wrong because on certain situations the domain did not exist yet, it is not relevant for most hook points and it's a low-level libvirt-coupled variable which we don't want to commit to.” kubevirt/kubevirt/pull/19403 ↗ 원문 보기
- [PR #19403][iholder101] Add PreBoot and PreMigrationSource sidecar launcher hook points for plugins.
github.com/kubevirt/kubevirt/releases/tag/v1.10.0준비 단계 라이브 마이그레이션 중단 시 마이그레이션 취소
도메인 준비 중이나 PreMigrationSource 훅 실행 중에 중단을 요청하면, 이전에는 AbortFailed를 보고하고 마이그레이션을 계속 진행했습니다. 이제는 마이그레이션을 취소하고 AbortSucceeded를 보고합니다. 핸드오프 이후 libvirt의 마이그레이션 작업을 확인할 수 있기 전까지의 짧은 시간 동안에는 중단 요청이 여전히 AbortFailed를 보고하며, virt-handler가 재시도합니다.
근거“Also, there's a small behavior change for all migrations (with or without plugins): an abort that arrives while the migration is being prepared (domain preparation or `PreMigrationSource` hooks) now cancels it and reports `AbortSucceeded`, where it previously reported `AbortFailed` and the migration continued. A short window remains between the hand-off and libvirt's migration job becoming observable; an abort landing there still reports `AbortFailed`, and virt-handler retries.” kubevirt/kubevirt/pull/19403 ↗ 원문 보기
- [PR #19403][iholder101] Add PreBoot and PreMigrationSource sidecar launcher hook points for plugins.
github.com/kubevirt/kubevirt/releases/tag/v1.10.0ContainerPathVolume 비활성화 시 새 ContainerPath 사용에 대한 VM/VMI 어드미션 거부
영향 대상ContainerPathVolume 기능 게이트가 비활성화된 상태에서 ContainerPath를 사용하는 VM/VMI 워크로드
이 변경 전에는 새 사용에 대해 VM/VMI 어드미션에서 기능 게이트를 확인하지 않았습니다. 다만 게이트를 비활성화하기 전에 어드미션된 VMI에 대해서는 컨트롤러 측 검사가 유지되었습니다. 이미 ContainerPath를 사용하는 오브젝트의 업데이트는 계속 허용됩니다.
근거“Rejects new ContainerPath usage at VM/VMI admission when the feature gate is disabled, while allowing updates to objects already using it.” kubevirt/kubevirt/pull/19251 ↗ 원문 보기
- [PR #19251][mhenriks] Check ContainerPathVolume feature gate at admission time. Reject /run/kubevirt* and /run/libvirt* paths.
github.com/kubevirt/kubevirt/releases/tag/v1.10.0DRA ResourceClaim을 사용하는 VMI의 마이그레이션 불가 표시
영향 대상NetworkDevicesWithDRA가 활성화된 상태에서 ResourceClaim을 기반으로 하는 DRA 네트워크를 사용하는 VMI
ResourceClaim은 특정 할당에 바인딩되므로 마이그레이션 대상 파드가 해당 할당을 다시 예약할 수 없습니다.
근거“VerifyVMIMigratable now rejects the former. The check is guarded by the NetworkDevicesWithDRA feature gate, threaded in from virt-handler, so behavior is unchanged when the gate is disabled.” kubevirt/kubevirt/pull/19468 ↗ 원문 보기
- [PR #19468][orelmisan] VMI whose DRA network is backed by a ResourceClaim (rather than a ResourceClaimTemplate) are now reported as non-migratable.
github.com/kubevirt/kubevirt/releases/tag/v1.10.0KubeVirt 인프라 컨테이너의 읽기 전용 루트 파일시스템 적용
영향 대상virt-handler와 virt-launcher init 컨테이너를 제외한 KubeVirt 인프라 컨테이너
필요 조치쓰기 가능한 /tmp 볼륨 불필요, 마운트된 Secret 경로에서 인증서 직접 로드
이번 릴리스 전에는 포함된 컨테이너에 readOnlyRootFilesystem: true 설정이 없었고, virt-api는 사용하지 않는 임시 인증서 디렉터리를 만들었습니다. 이제 인증서는 마운트된 Secret 경로에서 직접 로드하며, 쓰기 가능한 /tmp 볼륨은 추가되지 않습니다.
근거“KubeVirt containers (`virt-operator`, `virt-api`, `virt-controller`, `virt-exportproxy`, and `virt-synchronization-controller`) run without `readOnlyRootFilesystem: true`, triggering compliance scan findings.” kubevirt/kubevirt/pull/18853 ↗ 원문 보기
- [PR #18853][davmarro] Enable readOnlyRootFilesystem for all KubeVirt infrastructure containers
github.com/kubevirt/kubevirt/releases/tag/v1.10.0지원 중단 예정이었던 virtctl create vm 볼륨 플래그 제거
영향 대상--volume-blank, --volume-datasource 또는 --volume-clone-pvc를 사용하는 virtctl create vm 호출(추정)
볼륨 생성에는 제거된 플래그 대신 --volume-import와 type:blank, type:ds 또는 type:pvc를 사용합니다.
원문 보기
- [PR #19362][NoamBerkoLaor] Removed deprecated virtctl create vm flags --volume-blank, --volume-datasource, and --volume-clone-pvc. Use --volume-import with type:blank, type:ds, or type:pvc instead.
github.com/kubevirt/kubevirt/releases/tag/v1.10.0새 virt-export 서비스의 헤드리스 포트 8443
새 export의 링크는 :8443을 사용하지만, 기존 ClusterIP export는 계속 :443을 사용합니다. https://virt-export-*.svc:443을 하드코딩한 클라이언트는 새 export에서 작동하지 않습니다. status.links를 따르는 클라이언트는 계속 작동합니다.
근거“New exports are not ClusterIP on `:443`. Clients that hardcode `https://virt-export-*.svc:443` will break for those. Clients that follow `status.links` should be fine. Leftover ClusterIP exports stay on `:443`.” kubevirt/kubevirt/pull/18606 ↗ 원문 보기
- [PR #18606][OOsemka] Make new virt-export Services headless on port 8443 so virt-exportproxy can reach exporters across isolated networks. Existing ClusterIP/443 export Services are left in place. Internal VMExport links include the Service dial port (:8443 or :443).
github.com/kubevirt/kubevirt/releases/tag/v1.10.0플러그인 훅의 spec.launcherHooks 전환
영향 대상spec.domainHooks 또는 PreVMStop을 사용하는 플러그인 오브젝트(추정)
이전에는 spec.domainHooks에 훅 포인트를 명시할 필요가 없었고, stop 훅 포인트의 이름은 PreVMStop이었습니다. 이제 launcher 훅에는 훅 포인트를 명시해야 하며, OnVMStop을 사용합니다.
원문 보기
- [PR #19160][iholder101] Plugin's spec.domainHooks is renamed to spec.launcherHooks. Launcher hooks now require explicit hook points. PreVMStop is renamed to OnVMStop.
github.com/kubevirt/kubevirt/releases/tag/v1.10.0virt-handler /v1/vmstats의 GET에서 POST로 전환
영향 대상virt-handler의 /v1/vmstats 엔드포인트를 호출하는 클라이언트(추정)
이전에는 하나의 VMStatsRequest가 노드의 모든 VMI에 적용됐고, 통계 범주는 쿼리 매개변수로 선택했습니다. 이제 요청 본문에 JSON을 사용해 VMI마다 통계 범주를 지정합니다.
근거“virt-handler GetVMStats accepts a per-VMI VMStatsRequest body, allowing the caller to filter which VMIs to collect from and specify the stats categories it needs on a per-VMI basis, rather than one set applied to every VMI on the node, so it can collect different data for different VMIs in a single call.” kubevirt/kubevirt/pull/18938 ↗ 원문 보기
- [PR #18938][machadovilaca] Accept a per-VMI VMStatsRequest body in virt-handler GetVMStats
github.com/kubevirt/kubevirt/releases/tag/v1.10.0GPU 메모리 복사 레코딩 룰 이름을 vmi:kubevirt_vmi_gpu_mem_copy_utilization_ratio:sum으로 변경
영향 대상vmi:kubevirt_vmi_gpu_mem_copy_util:sum을 사용하는 모니터링 쿼리와 대시보드(추정)
이전 레코딩 룰 이름은 vmi:kubevirt_vmi_gpu_mem_copy_util:sum이었습니다.
근거“-| vmi:kubevirt_vmi_gpu_mem_copy_util:sum | Recording rule | Gauge | Memory utilization (ratio, 0-1) of the GPU passed through to a virtual machine instance. |” kubevirt/kubevirt/pull/19144 ↗ 원문 보기
- [PR #19144][machadovilaca] Add GPU utilization time and active engine time recording rules
github.com/kubevirt/kubevirt/releases/tag/v1.10.0client-go KubeVirt 서브리소스 클라이언트 헬퍼 제거
영향 대상GetKubevirtSubresourceClient 또는 GetKubevirtSubresourceClientFromFlags를 호출하는 client-go 애플리케이션 또는 도구(추정)
이 함수들은 KubeVirt 서브리소스 클라이언트를 생성해 반환하는 방법을 제공했습니다.
원문 보기
- [PR #18874][xpivarc] client-go: GetKubevirtSubresourceClient is removed
github.com/kubevirt/kubevirt/releases/tag/v1.10.0DRA 네트워크에서 SR-IOV 바인딩 거부
영향 대상SR-IOV 인터페이스로 구성된 DRA 네트워크
이전에는 DRA 네트워크에서 SR-IOV 바인딩을 사용할 수 있었고, virt-launcher가 패스스루에 필요한 PCI 주소를 DRA 장치 메타데이터에서 확인했습니다. 이제 이러한 인터페이스에는 바인딩 플러그인을 사용해야 합니다.
근거“It is no longer possible to use SR-IOV binding with DRA networks - the network admitter rejects them and only allows interfaces using binding plugins.” kubevirt/kubevirt/pull/18451 ↗ 원문 보기
- [PR #18451][orelmisan] SR-IOV interfaces are no longer supported with DRA networks.
github.com/kubevirt/kubevirt/releases/tag/v1.10.0LibvirtHooksServerAndClient GA 승격 및 상시 활성화
영향 대상LibvirtHooksServerAndClient를 설정하거나 라이브 마이그레이션에 해당 도메인 변경 훅을 사용하는 환경
이전에는 도메인 변경 훅 메커니즘이 베타 기능이어서 명시적으로 활성화해야 했습니다. 이 훅은 마이그레이션 중 TAP 장치 이름을 조정합니다.
근거“Graduate the `LibvirtHooksServerAndClient` feature gate (VEP-141) to GA.” kubevirt/kubevirt/pull/18687 ↗ 원문 보기
- [PR #18687][Barakmor1] Graduate LibvirtHooksServerAndClient feature gate to GA
github.com/kubevirt/kubevirt/releases/tag/v1.10.0스톨 디텍터 API 필드 타입 변경
영향 대상MigrationStallDetection을 활성화한 상태로 v1.9에서 업그레이드하는 클러스터와 v1.9 StallDetectorOptions를 가져오는 SDK
네 개의 factor 필드 타입이 *string에서 *resource.Quantity로 변경되고, StallProgressTimeout과 SwitchoverTimeout 타입이 *uint64에서 *int64로 변경됩니다. 이 변경으로 MigrationStallDetection을 활성화한 클러스터의 업그레이드가 실패할 수 있으며, v1.9 타입을 가져오는 SDK에서 컴파일 오류가 발생할 수 있습니다.
근거“**Backward compatibility note:** These changes are NOT strictly backward compatible. At the API level, these changes break API SDK since anyone importing kubevirt.io/api/core/v1 from v1.9 and using StallDetectorOptions would see compile-time breakage when upgrading (e.g. *string -> *resource.Quantity). But at the serialization/upgrade level for API they ARE compatible. On the wire, MigrationOptions changes are breaking and thus this will break cluster upgrades if someone has the FG enabled when upgrading 1.9->1.10.” kubevirt/kubevirt/pull/18303 ↗ 원문 보기
- [PR #18303][Aseeef] BREAKING CHANGE: Modifies internal on-the-wire API fields for the stall detector feature; MigrationStallDetection FG must be disabled for cluster upgrades to succeed.
github.com/kubevirt/kubevirt/releases/tag/v1.10.0비-NIC 장치용 PCI 루트 포트의 핫플러그 비활성화
영향 대상비-NIC 장치가 연결된 PCI 루트 포트를 사용하는 VM
게스트 OS의 핫플러그 기능을 사용하면 Windows의 “하드웨어 안전하게 제거” 메뉴처럼 디스크, 메모리 벌룬, RNG, 워치독을 비롯한 중요 장치를 꺼낼 수 있었습니다. NIC 포트와 향후 핫플러그를 위해 예약된 빈 포트는 계속 사용할 수 있습니다.
원문 보기
- [PR #17605][dasionov] Bug fix: Prevent guest OS from ejecting critical PCI devices (disks, memory balloon, RNG, watchdog) via hotplug mechanisms like the Windows "Safely Remove Hardware" tray menu. PCI root ports hosting non-NIC devices are now marked as non-hotpluggable, while NIC ports and empty ports reserved for future hotplug remain available.
github.com/kubevirt/kubevirt/releases/tag/v1.10.0Slirp 네트워크 바인딩 플러그인 사이드카 이미지 제거
영향 대상slirp 네트워크 바인딩 플러그인 사이드카 이미지를 참조하거나 사용하는 설정
원문 보기
- [PR #18613][orelmisan] Removed the slirp network binding plugin sidecar image. The plugin had no known consumers.
github.com/kubevirt/kubevirt/releases/tag/v1.10.0RamFB 디스플레이 검증에서 vGPU가 여러 개인 템플릿 거부
영향 대상ramFB가 있고 enabled가 설정되지 않은 vGPU를 포함하는 VirtualMachine 및 VirtualMachineInstanceReplicaSet 템플릿
이전에는 이러한 vGPU가 둘 이상 포함된 템플릿이 생성 시 허용된 뒤, 나중에 VMI를 생성할 때 실패할 수 있었습니다.
원문 보기
- [PR #18542][thc1006] RamFB display validation now treats a vGPU whose ramFB is present with its enabled field unset as an enabled display, matching the API default. A VirtualMachine or VirtualMachineInstanceReplicaSet template with more than one such vGPU is now rejected at creation instead of being accepted and failing later when its VMI is created.
github.com/kubevirt/kubevirt/releases/tag/v1.10.0